CIRP ANNALS 1986
|
|
|
|
|
STC A |
|
Product design for automated manufacture and assembly
|
|
A.J. Scarr / P.A. McKeown
|
|
STC A, 35/1/1986, P.1
|
|
Keywords: |
Abstract :
|
|
Tolerance technology - Computer based analysis
|
|
L.E. Farmer (1), C.A. Gladman (1)
|
|
STC A, 35/1/1986, P.7
|
|
Keywords: |
Abstract :
|
|
The automated assembly of dimensionally instable parts
|
|
J. Milberg, H. Diess / H.J. Warnecke
|
|
STC A, 35/1/1986, P.11
|
|
Keywords: |
Abstract :
|
|
A model-based grey-scale sensors system for robotics
|
|
E. Kutzer, N. Roth, p. Rummel / K.G. Günther
|
|
STC A, 35/1/1986, P.17
|
|
Keywords: |
Abstract :
|
|
Requirements for robotics in handling and maintenance functions on space platforms
|
|
G. Spur (1), G. Duelen, U. Kirchhoff, J. Hels
|
|
STC A, 35/1/1986, P.21
|
|
Keywords: |
Abstract :
|
STC C |
|
An investigation of some shear angle theories
|
|
N. Ueda, T. Matsuo (2) / T. Hoshi
|
|
STC C, 35/1/1986, P.27
|
|
Keywords: |
Abstract :
|
|
Improved HSS tool performance with mechanically resistant coatings
|
|
W. König (1), R. Kauven, A. Droese
|
|
STC C, 35/1/1986, P.31
|
|
Keywords: |
Abstract :
|
|
Performance of end mills made of different tool materials with regards to tool life and stability
|
|
M.A. Mannan / B. Lindström
|
|
STC C, 35/1/1986, P.37
|
|
Keywords: |
Abstract :
|
|
A common denominator for optimal cutting tool geometry
|
|
S. Kaldor / S. Malkin
|
|
STC C, 35/1/1986, P.41
|
|
Keywords: |
Abstract :
|
|
Finish cutting of case-hardened gears
|
|
R.P. Schwaighofer, A. Kälin / E. Matthias
|
|
STC C, 35/1/1986, P.45
|
|
Keywords: |
Abstract :
|
|
Analysis of oblique cutting with controlled contact tools
|
|
C. Rubenstein (1), P.K. Venuvinod (2), W.S. Lau (2)
|
|
STC C, 35/1/1986, P.51
|
|
Keywords: |
Abstract :
|
|
Cutting ceramics with a technique of hot machining
|
|
K. Uehara (1), H. Takeshita
|
|
STC C, 35/1/1986, P.55
|
|
Keywords: |
Abstract :
|
|
Machinability correlation among turning, milling and drilling processes
|
|
V.C. Venkatesh (1), V. Narayanan
|
|
STC C, 35/1/1986, P.59
|
|
Keywords: |
Abstract :
|
|
Wear behavior of silicon nitride tools as a function of their specific properties
|
|
R. Wertheim (1), D. Agranov
|
|
STC C, 35/1/1986, P.63
|
|
Keywords: |
Abstract :
|
|
A comprehensive tool wear model
|
|
B.M. Kramer (2) / B.F. Von Turkovich
|
|
STC C, 35/1/1986, P.67
|
|
Keywords: |
Abstract :
|
|
Groove wear of tools in the NC turning of pure nickel
|
|
M.T. Tan / Y.Z. Zhang
|
|
STC C, 35/1/1986, P.71
|
|
Keywords: |
Abstract :
|
STC Dn |
|
Variational product design by constraint propagation and satisfaction in product modelling
|
|
F. Kimura, H. Suzuki / T. Sata
|
|
STC Dn, 35/1/1986, P.75
|
|
Keywords: |
Abstract :
|
|
Manipulations and transformations of objects represented via switching functions for manufacturing applications
|
|
M. Shpitalni, G. Ma'Aian / E. Lenz
|
|
STC Dn, 35/1/1986, P.79
|
|
Keywords: |
Abstract :
|
|
Steps towards an integrated CAD/CAM system for mould design and manufacture. Anisotropic shrinkage, component library and link to NC machining and EDM
|
|
J.P. Kruth / J. Peters
|
|
STC Dn, 35/1/1986, P.83
|
|
Keywords: |
Abstract :
|
|
A new modular robot system
|
|
G. Pritschow / K. Tuffentsammer
|
|
STC Dn, 35/1/1986, P.89
|
|
Keywords: |
Abstract :
|
|
Design for economic manufacture
|
|
J. Corbett / J.R. Crookall
|
|
STC Dn, 35/1/1986, P.93
|
|
Keywords: |
Abstract :
|
|
Integrate CAD/CAM system for cams
|
|
Z. Gal-Tzur / J.R. Crookall
|
|
STC Dn, 35/1/1986, P.99
|
|
Keywords: |
Abstract :
|
|
Conceptual design based on the linguistic approach and the automata theory
|
|
V. Milacic (1), M. Pilipovic
|
|
STC Dn, 35/1/1986, P.103
|
|
Keywords: |
Abstract :
|
|
Designing algorithm for nesting irregular shapes with and without boundary constraints
|
|
A.Y.C. Nee (2), K.W. Seow, S.L. Long / V.C. Venkatesh
|
|
STC Dn, 35/1/1986, P.107
|
|
Keywords: |
Abstract :
|
STC E |
|
On the derivation and application of a real time tool wear sensor in EDM
|
|
D. Dauw / R. Snoeys
|
|
STC E, 35/1/1986, P.111
|
|
Keywords: |
Abstract :
|
|
Development of numerical ontouring control electric discharge machining (NCC-EDM)
|
|
K. Saito, T. Kishinami, H. Konno, M. Sato / H. Takeyama
|
|
STC E, 35/1/1986, P.117
|
|
Keywords: |
Abstract :
|
|
The identification and its means of servo feed adaptive control system in WEDM
|
|
Y.H. Huang, G.C. Zhao, Z.R. Zhang, C.Y. Yu / Y.Z. Zhang
|
|
STC E, 35/1/1986, P.121
|
|
Keywords: |
Abstract :
|
|
An investigation into the ability of correcting error in ECH
|
|
G.Q. Wei, M. Wu, C. Chen / G.F. Micheletti
|
|
STC E, 35/1/1986, P.125
|
|
Keywords: |
Abstract :
|
|
Photochemical machining of molybdenum
|
|
D.M. Allen, L.S. Beristain, P.J. Gilbanks / J.R. Crookall
|
|
STC E, 35/1/1986, P.129
|
|
Keywords: |
Abstract :
|
|
TiN-coatings deposited by triode ion plating on tools and dies
|
|
M.S. Sulonen (1), A.S. Korhonen
|
|
STC E, 35/1/1986, P.133
|
|
Keywords: |
Abstract :
|
STC F |
|
Mathematical representation of friction in metal forming analysis
|
|
J.A.H. Ramaekers, J.A.G. Kals (1)
|
|
STC F, 35/1/1986, P.137
|
|
Keywords: |
Abstract :
|
|
Pressure distribution in plate rolling
|
|
P. Christensen, H. Everfelt, N. Bay (2) / T. Wanheim
|
|
STC F, 35/1/1986, P.141
|
|
Keywords: |
Abstract :
|
|
Complex simulation system of forging based on UBET
|
|
M. Kiuchi / H. Kudo
|
|
STC F, 35/1/1986, P.147
|
|
Keywords: |
Abstract :
|
|
Strip rolling of hardening rate sensitive solids
|
|
D. Iddan, J. Tirosh, O. Pawelski / E. Lenz
|
|
STC F, 35/1/1986, P.151
|
|
Keywords: |
Abstract :
|
|
Application of a thermo-viscoplastic model to the analysis of defects in warm forming conditions
|
|
J.C. Gelin / A. Moisan
|
|
STC F, 35/1/1986, P.157
|
|
Keywords: |
Abstract :
|
|
A study of buckling in upsetting by use of finite element method
|
|
K. Osakada (2), K. Mori / Y. Tozawa
|
|
STC F, 35/1/1986, P.161
|
|
Keywords: |
Abstract :
|
|
Strain measurements in 3D simulation of metal forming processes
|
|
T. Wanheim (1), C. Fischlein, F. Yoshida
|
|
STC F, 35/1/1986, P.165
|
|
Keywords: |
Abstract :
|
|
Analytical and experimental investigation into lubricated three-dimensional extrusion of general helical sections
|
|
D.Y. Yang / I. Ham
|
|
STC F, 35/1/1986, P.169
|
|
Keywords: |
Abstract :
|
|
Reverse deep drawing with hydraulic counter pressure using the peripheral pushing effect
|
|
K. Nakamura, T. Nakagawa (1)
|
|
STC F, 35/1/1986, P.173
|
|
Keywords: |
Abstract :
|
|
Prediction of dimensional accuray of col extruded can during repeating operation
|
|
T. Kato, Y. Tozawa (1), K. Nakanishi, T. Kawabe
|
|
STC F, 35/1/1986, P.177
|
|
Keywords: |
Abstract :
|
|
A drawing modulus for multi-pass drawing
|
|
F.D. Negroni, E.G. Thomsen / S. Kobayashi
|
|
STC F, 35/1/1986, P.181
|
|
Keywords: |
Abstract :
|
|
Superplastic precision forming of Ti-ally integrated turbine isc
|
|
J.T. Hai, F.Z. Gong, X.M. Wang, X.Y. Qin, T.Y. Ma / H. kudo
|
|
STC F, 35/1/1986, P.185
|
|
Keywords: |
Abstract :
|
|
Precision of weight and shape with shared billets
|
|
E. Doege (1), G. Hartke, H. Fleischer
|
|
STC F, 35/1/1986, P.189
|
|
Keywords: |
Abstract :
|
|
Reduction of wear on sheet metal forming tools
|
|
D. Schmoeckel, H. Frontzek / E. Von Finckenstein
|
|
STC F, 35/1/1986, P.195
|
|
Keywords: |
Abstract :
|
|
Application of chemical and physical methods or the reduction of tool wear in bulk metal forming processes
|
|
C. Weist, H. Weitheide / K. Lange
|
|
STC F, 35/1/1986, P.199
|
|
Keywords: |
Abstract :
|
STC G |
|
High efficiency grinding of ceramics and hard metals on grinding center
|
|
T. Nakagawa (1), K. Suzuki, T. Uematsu
|
|
STC G, 35/1/1986, P.205
|
|
Keywords: |
Abstract :
|
|
High-efficiency grinding of advanced ceramics
|
|
I. Inasaki (2) / K. Nakayama
|
|
STC G, 35/1/1986, P.211
|
|
Keywords: |
Abstract :
|
|
Development of a high-efficieny finishing process using "liquid-bonded wheel"
|
|
Y. Tani, K. Kawata / H. Sato
|
|
STC G, 35/1/1986, P.215
|
|
Keywords: |
Abstract :
|
|
Workpiece material removal and lapping wheel wear in plane and plane-parallel lapping
|
|
J. Kling / E. Matthias
|
|
STC G, 35/1/1986, P.219
|
|
Keywords: |
Abstract :
|
|
Prediction of creep feed performance from simple plunge grinding tests
|
|
T.R.A. Pearce, T.D. Howes / B.J. Davies
|
|
STC G, 35/1/1986, P.223
|
|
Keywords: |
Abstract :
|
|
The prediction and control of workpiece burn during grinding process. Application of graphite penetrate wheels
|
|
J.S. Tang, Y.Z. Zhang (1), X.F. Pu, H.J. Xu
|
|
STC G, 35/1/1986, P.227
|
|
Keywords: |
Abstract :
|
|
Suppression of whel regenerative grinding vibration by alternating wheel speed
|
|
T. Hoshi (1), S. Matsumoto, S. Mitsui, O. Horiuchi
|
|
STC G, 35/1/1986, P.231
|
|
Keywords: |
Abstract :
|
|
Optimisation studies in high removal rate centreless grinding
|
|
W.B. Rowe, W.F. Bell, D. Brough / B.J. Davies
|
|
STC G, 35/1/1986, P.235
|
|
Keywords: |
Abstract :
|
|
Investigations and prediction of diamond wear when sawing
|
|
D.N. Wright, H. Wapler / H.K. Tönshoff
|
|
STC G, 35/1/1986, P.239
|
|
Keywords: |
Abstract :
|
|
Local contact deflections in grinding. Groups of grains and single grains
|
|
J.G. Wager (1), D.P. Saini
|
|
STC G, 35/1/1986, P.245
|
|
Keywords: |
Abstract :
|
|
Fundamental dependencies upon contact lengths and results in grinding
|
|
E. Saljé (1), H. Möhlen
|
|
STC G, 35/1/1986, P.249
|
|
Keywords: |
Abstract :
|
STC M |
|
Thermal effects on the accuracy of numerically controlled machine tools
|
|
R. Venugopal, M. Barash / M.C. Shaw
|
|
STC M, 35/1/1986, P.255
|
|
Keywords: |
Abstract :
|
|
A contribution to the analysis and compensation of the gometric error of a machining center
|
|
P.M. Ferreira, C.R. Liu / E. Merchant
|
|
STC M, 35/1/1986, P.259
|
|
Keywords: |
Abstract :
|
|
A study on the design improvement of lathes based on a chatter analysis and a component mode synthesis
|
|
J.M. Lee / I. Ham
|
|
STC M, 35/1/1986, P.263
|
|
Keywords: |
Abstract :
|
|
A new critivcal stability formula and a new absolute stability criterion
|
|
Z.J. Yuan, L.J. Cai / A. Kobayashi
|
|
STC M, 35/1/1986, P.267
|
|
Keywords: |
Abstract :
|
|
Non-linearities in spindle bearings and their effects
|
|
J. Tlusty (1), R. Livingstone, Y. B. Teng
|
|
STC M, 35/1/1986, P.269
|
|
Keywords: |
Abstract :
|
|
The measurement of the frequency depndent characteristics of damping materials by means of their time history
|
|
J. Peters (1), C. De Meersman, B. Devis
|
|
STC M, 35/1/1986, P.275
|
|
Keywords: |
Abstract :
|
|
Development of ultra precesion machine tool made of ceramics
|
|
Y. Furukawa (2), N. Morinuki, K. Kitagawa / N. Taniguchi
|
|
STC M, 35/1/1986, P.279
|
|
Keywords: |
Abstract :
|
|
Tool wear and breakage detection using a process model
|
|
Y. Koren (1), A. G. Ulsoy, K. Danai
|
|
STC M, 35/1/1986, P.283
|
|
Keywords: |
Abstract :
|
|
A sound monitoring system for fault detection of machine and machining states
|
|
S. Takata, J.H. Ahn, M. Miki, Y. Miyao, T. Sata (1)
|
|
STC M, 35/1/1986, P.289
|
|
Keywords: |
Abstract :
|
|
Optimisation of internal grinding by micro-computer-base force control
|
|
H.K. Tönshoff (1), M. Zinngrebe, M. Kimmerling
|
|
STC M, 35/1/1986, P.293
|
|
Keywords: |
Abstract :
|
|
The automatic cran as a mateial transportation system in FMS
|
|
A. Noh, T. Isegame / K. Iwata
|
|
STC M, 35/1/1986, P.297
|
|
Keywords: |
Abstract :
|
|
Dynamic model of an articulated robot suitable for processing on a microcomputer
|
|
A. Bodner, R. Weill (1)
|
|
STC M, 35/1/1986, P.301
|
|
Keywords: |
Abstract :
|
|
A robot-arm with compensation for bending
|
|
P.C. Mulders, A.C.H. Van Der Wolf (1), C.J. Heuvelman (1), M.P. Van Wissekerke
|
|
STC M, 35/1/1986, P.305
|
|
Keywords: |
Abstract :
|
|
Manufacturing applications from robotic sheep shearing
|
|
S.J. Key, J.P. Trevelyan, B.J. Stone (1)
|
|
STC M, 35/1/1986, P.309
|
|
Keywords: |
Abstract :
|
STC O |
|
Developing and implementing modernization/integration strategies for manufacturing companies.
|
|
R.N. Nagel, K.A. Krenz, M. Shelly / R. Hocken
|
|
STC O, 35/1/1986, P.313
|
|
Keywords: |
Abstract :
|
|
Integration of engineering functions/isciplines in CIM
|
|
L. Alting / T. Wanheim
|
|
STC O, 35/1/1986, P.317
|
|
Keywords: |
Abstract :
|
|
Representation of know-how and its application to decision of machining reference surfaces in computer aided process planning
|
|
K. Iwata (1), Y. Fukuda
|
|
STC O, 35/1/1986, P.321
|
|
Keywords: |
Abstract :
|
|
XPLANE, a generative computer aided process planning system for part manufacturing
|
|
A.H. Van'T Erve, H.J.J. Kals (1)
|
|
STC O, 35/1/1986, P.325
|
|
Keywords: |
Abstract :
|
|
Strategy in generative planning of turning processes
|
|
F.J.A.M. Van Houten (2) / H.J.J. Kals
|
|
STC O, 35/1/1986, P.331
|
|
Keywords: |
Abstract :
|
|
COATS : an expert module for optimal tool selection
|
|
F. Giusti (1), M. Santochi (2), G. Dini
|
|
STC O, 35/1/1986, P.337
|
|
Keywords: |
Abstract :
|
|
Automatique generation of part programs for CNC coordinate measuring machines linked to CAD/CAM systems
|
|
W. Eversheim (1), J. Auge
|
|
STC O, 35/1/1986, P.341
|
|
Keywords: |
Abstract :
|
|
KOSMO - A simulator for flexible manufacturing systems
|
|
H. Wakai, S. Kado, C. Sakamoto, T. Sata (1)
|
|
STC O, 35/1/1986, P.347
|
|
Keywords: |
Abstract :
|
|
Architecture for computer-integrated manufacuring
|
|
D.K. Allen / J. Bryan
|
|
STC O, 35/1/1986, P.351
|
|
Keywords: |
Abstract :
|
|
An automatic quality controller for resistance spot welding processes
|
|
H.S. Cho / I. Ham
|
|
STC O, 35/1/1986, P.355
|
|
Keywords: |
Abstract :
|
STC P(Q) |
|
Shower and high pressure oil temperature control
|
|
D.B. De Bra (2), R.A. Victor, J. Bryan (1)
|
|
STC P(Q), 35/1/1986, P.359
|
|
Keywords: |
Abstract :
|
|
Measurement of surface shape by scanning electron microscope using detection of normal
|
|
H. Sato (1), M. O-Hori
|
|
STC P(Q), 35/1/1986, P.365
|
|
Keywords: |
Abstract :
|
|
Improving the accuracy of angle measurement in machine calibration
|
|
G. Zhang / R. Hocken
|
|
STC P(Q), 35/1/1986, P.369
|
|
Keywords: |
Abstract :
|
|
Design and performance of a small precision CNC turning machine
|
|
R.R. Donaldson (2), D.C. Thompson / E.G. Loewen
|
|
STC P(Q), 35/1/1986, P.373
|
|
Keywords: |
Abstract :
|
|
Optimization of error-of-roundness in turning processes
|
|
M. Rahman, V. Narayanan / V.C. Venkatesh
|
|
STC P(Q), 35/1/1986, P.377
|
|
Keywords: |
Abstract :
|
|
Computer aided tolerancing and dimensioning in process planning
|
|
D. Fainguelernt, R. Weill (1), P. Bourdet (2)
|
|
STC P(Q), 35/1/1986, P.381
|
|
Keywords: |
Abstract :
|
|
Design and results of a new interference refractometer based on a commercially available laserinterferometer
|
|
P. Schellekens (2), J. Spronck, E. Van De Pasch / A.C.H. Van Der Wolf
|
|
STC P(Q), 35/1/1986, P.387
|
|
Keywords: |
Abstract :
|
|
Theoretical modelisation and experimental identification of the geometrical parameters of coordinate-machines, by measuring a multi-directed bar
|
|
F. Jouy / A. Clément
|
|
STC P(Q), 35/1/1986, P.393
|
|
Keywords: |
Abstract :
|
STC S |
|
Residual stress and deformation energy under ground surfaces of brittle solids
|
|
O. Podzimek / C.J. Heuvelman
|
|
STC S, 35/1/1986, P.397
|
|
Keywords: |
Abstract :
|
|
Asperity peak curvature changes during lubricated sliding
|
|
J.D. Cogdell, W.R. De Vries (2) / J.F. Kahles
|
|
STC S, 35/1/1986, P.401
|
|
Keywords: |
Abstract :
|
|
Characterization of surfaces for the description of their functional behaviour in contact poblems
|
|
D.R. Axelrad, L. Kops (1), M.K.R. Rao
|
|
STC S, 35/1/1986, P.405
|
|
Keywords: |
Abstract :
|
|
Residual stresses measurement in plates by electro-chemical machining of fine layers
|
|
M. Laracine, C. Bignon, M. Boivin, M. Lormand / R. Geslot
|
|
STC S, 35/1/1986, P.409
|
|
Keywords: |
Abstract :
|
|
Enstehung und Ermittlung von Eigenspannungen 1. Art in Biege-und Tiefziehteiltlen
|
|
E. Von Finckenstein (1), U. Preckel
|
|
STC S, 35/1/1986, P.413
|
|
Keywords: |
Abstract :
|
|
A model for vibrations during dry sliding friction
|
|
J. Dautzenberg (2), J.A.G. Kals (1)
|
|
STC S, 35/1/1986, P.417
|
|
Keywords: |
Abstract :
|
