THE INTERNATIONAL ACADEMY FOR PRODUCTION ENGINEERING

LOG IN FOR MEMBERS

CIRP ANNALS 1982

GO TO STC: A C Dn E F G M O P S Cross-STC

 STC C 
An analysis of gravity-fed hacksawing for force and cutting rate prediction
D. Santikarn, E.J.A. Armarego (1)  
STC C,  31/1/1982,  P.1
Keywords:
Abstract :
Characterization of CVD coated carbide layers and their thermal properties
R. Wertheim (2), R. Sivan, R. Porat, A. Ber (1)  
STC C,  31/1/1982,  P.7
Keywords:
Abstract :
The first seconds of cutting, wear behavior
A. Ber (1), S. Kaldor  
STC C,  31/1/1982,  P.13
Keywords:
Abstract :
The influence of aqueous fluids on the wear characteristics and life of carbide cutting tools
T. Kurimoto, G. Barrow   / B.J. Davies
STC C,  31/1/1982,  P.19
Keywords:
Abstract :
Use of powder metallurgical high speed steel in gear hobbing and gear shaping
K.D. Bouzakis (2), W. König (1), K. Vossen  
STC C,  31/1/1982,  P.25
Keywords:
Abstract :
The use of fundamental mechanical properties in the design of the tool cutting angles
D. Bizeul (2), P. Tajan, F. Le Maître (1)  
STC C,  31/1/1982,  P.31
Keywords:
Abstract :
Behaviour of ceramics tools during the machining of nickel base alloys
J. Vigneau, J.J. Boulanger   / F. Le Maître
STC C,  31/1/1982,  P.35
Keywords:
Abstract :
Time and feed dependent fracture of cutting tools - A stochastic model
R. Levi (1), Y. Koren (2), S. Malkin (1), O. Masory  
STC C,  31/1/1982,  P.41
Keywords:
Abstract :
Short time test method for selection of proper cutting tools materials
T.N. Loladze (1), G.R. Tkemaladze, O.V. Kochiashvili, A.I. Mikanadze  
STC C,  31/1/1982,  P.45
Keywords:
Abstract :
Predicting the effects of very high cutting speed on cutting forces, etc
P. Mathew, P.L.B. Oxley (1)  
STC C,  31/1/1982,  P.49
Keywords:
Abstract :
An investigation of cut-off bars and pipes by horizontal band sawing
E. Kuljanic (2)   / J. Peklenik
STC C,  31/1/1982,  P.53
Keywords:
Abstract :
Surface integrity of cemented carbide tool and its brittle fracture
H. Takeyama (1), N. Iijima, K. Uno  
STC C,  31/1/1982,  P.59
Keywords:
Abstract :
Effects of machine-tool-workpiece stiffness on the wear behavior of superhard cutting materials
G. Chryssolouris   / H.K. Tönshoff
STC C,  31/1/1982,  P.65
Keywords:
Abstract :
Microfracture of diamond as fine tool material
N. Ikawa (2), S. Shimada   / H. Tsuwa
STC C,  31/1/1982,  P.71
Keywords:
Abstract :
Tool wear in titanium machining
P.D. Hartung, B.M. Kramer   / B.F. Von Turkovich
STC C,  31/1/1982,  P.75
Keywords:
Abstract :
An analysis of saw-toothed chip formation
N. Ueda, T. Matsuo (2)   / K. Uehara
STC C,  31/1/1982,  P.81
Keywords:
Abstract :
On the nature of cyclic stresses in the tool tip in peripheral milling and their implications on tool fracture
H. Chandrasekaran, T.A.J. Reddy   / V.C. Venkatesh
STC C,  31/1/1982,  P.85
Keywords:
Abstract :
The minimum energy principle applied to the cutting process of various workpiece materials and tool rake angles
J.H. Dautzenberg, J.A.W. Hijink, A.C.H. Van Der Wolf (1)  
STC C,  31/1/1982,  P.91
Keywords:
Abstract :
Recognition of the cutting states for the difficult-to-cut materials. Application of the pattern recognition technique
Y.Z. Zhang (2), Z.F. Liu, L.X. Pan, Y.J. Liu, W.B. Yang   / J. Peklenik
STC C,  31/1/1982,  P.97
Keywords:
Abstract :

 STC E 
Has the "delay-time" influence on the EDM-process ?
H.E. De Bruyn   / A.J. Pekelharing
STC E,  31/1/1982,  P.103
Keywords:
Abstract :
Generation and propagation of pressure wave by spark discharge in liquid
H. Tsuchiya, T. Inoue, Y. Mori   / N. Taniguchi
STC E,  31/1/1982,  P.107
Keywords:
Abstract :
Control of wire-EDM preventing electrode from breaking
N. Kinoshita (1), M. Fukui, G. Gamo  
STC E,  31/1/1982,  P.111
Keywords:
Abstract :
Application of eddy currents to the in-process measurement of the gap in ECM
C. Bignon, C. Bedrin (2)   / R. Weill
STC E,  31/1/1982,  P.115
Keywords:
Abstract :
The investigation of the flow characteristics of the gap in the pulse electrochemical machining (PECM)
C.Y. Yu, C.S. Liu, Y.H. Huang, Y.C. Hsu   / J. Peklenik
STC E,  31/1/1982,  P.119
Keywords:
Abstract :
Technological applications of the laser beam in heat treatments
G. Ricciardi, M. Cantello, G.F. Micheletti (1)  
STC E,  31/1/1982,  P.125
Keywords:
Abstract :

 STC F 
Computer aided process modeling of hot forging and extrusion of aluminum alloys
J.S. Gunasekera (2), H.L. Gegel, J.C. Malas, S.M. Doreivelu, J.T. Morgan   / T. Altan
STC F,  31/1/1982,  P.131
Keywords:
Abstract :
Process modelling of forging with heated dies. Applications to a nickel-base-alloy
C.R. Boer (2), G. Schroeder   / M. Burgdorf
STC F,  31/1/1982,  P.137
Keywords:
Abstract :
Application of CAD-CAM techniques to close tolerance forging of spiral bevel gears
A.M. Sabroff, J.R. Douglas, A. Badawy, T. Altan (1)  
STC F,  31/1/1982,  P.141
Keywords:
Abstract :
Possibilities for the use of the finite element method for the analysis of bulk metal forming processes
K. Roll   / K. Lange
STC F,  31/1/1982,  P.145
Keywords:
Abstract :
Photoplastic modelling of forming process
A. Mulc   / B. Milcic
STC F,  31/1/1982,  P.151
Keywords:
Abstract :
The application of finite element analysis in designing forming tools for automotive body panels
S.K. Samanta   / B.F. Von Turkovich
STC F,  31/1/1982,  P.155
Keywords:
Abstract :
Design for economical use of forging, indication of general relative forging costs
W.A. Knight, C.R. Poli   / G. Boothroyd
STC F,  31/1/1982,  P.159
Keywords:
Abstract :
Sheet metal die forming using closed loop shape control
D.E. Hardt, R.D. Webb   / N.P. Suh
STC F,  31/1/1982,  P.165
Keywords:
Abstract :
Determining stress strain curves of sheet metal in the plane torsion test
A.E. Tekkaya, K. Pöhlandt   / K. Lange
STC F,  31/1/1982,  P.171
Keywords:
Abstract :
An investigation into plasto-hydrodynamic lubrication with a cold sheet drawing test
H. Kudo (1), M. Tsubouchi, H. Takada, K. Okamura (1)  
STC F,  31/1/1982,  P.175
Keywords:
Abstract :
Cold forming aluminium alloys. Development of a control system for a phosphate lubrication process
L.E. Farmer (2)   / P.L.B. Oxley
STC F,  31/1/1982,  P.181
Keywords:
Abstract :
Free surface profiles and workability limits in the heading process
P. Bariani   / F. Jovane
STC F,  31/1/1982,  P.185
Keywords:
Abstract :
Instable material flow in extrusion and upsetting
J.A.H. Ramaekers, J.A.G. Kals (1)  
STC F,  31/1/1982,  P.191
Keywords:
Abstract :
Chatter in cold rolling
J. Tlusty (1), G. Chandra, S. Critchley, D. Paton,  
STC F,  31/1/1982,  P.195
Keywords:
Abstract :

 STC G 
A numerical method to describe the kinematics of grinding
W. König (1), K. Steffens  
STC G,  31/1/1982,  P.201
Keywords:
Abstract :
Low temperature precision grinding and outlook of its development
T.N. Loladze (1), B.I. Batiashvili, D.S. Butskhrikidze, G.L. Mamulashvili, G.I. Grdzelishvili, J.I.   
STC G,  31/1/1982,  P.205
Keywords:
Abstract :
Thermal radiation in surface grinding
L. Kops (1), M.C. Shaw (1)  
STC G,  31/1/1982,  P.211
Keywords:
Abstract :
Practical significance of contact deflections in grinding
D.P. Saini, J.G. Wager (1), R.H. Brown (1)  
STC G,  31/1/1982,  P.215
Keywords:
Abstract :
Diagram for selecting chatter free conditions of centerless grinding
M. Miyashita (2), F. Hashimoto, A. Kanai   / K. Okamura
STC G,  31/1/1982,  P.221
Keywords:
Abstract :
The surface roughness produced when austenitic stainless steel is ground by alumina wheels
S. Yossifon, C. Rubenstein (1)  
STC G,  31/1/1982,  P.225
Keywords:
Abstract :
Tool oscillation and tilt angle control for curved surface polishing
K. Noto, T. Kawai, M. Watanabe   / A. Kobayashi
STC G,  31/1/1982,  P.229
Keywords:
Abstract :
Characteristics of air flow around a grinding wheel and their availability for assessing the wheel wear
J. Shibata, T. Goto, M. Yamamoto   / H. Tsuwa
STC G,  31/1/1982,  P.233
Keywords:
Abstract :

 STC M 
Broches de machines-outils pour usinage à grande vitesse
P.J. Duchaine (1)  
STC M,  31/1/1982,  P.239
Keywords:
Abstract :
Application of modal analysis to machine tool structures
N. Okubo, Y. Yoshida   / T. Hoshi
STC M,  31/1/1982,  P.243
Keywords:
Abstract :
The electronic gearbox. Computer software replaces mechanical couplings
J. Dinsdale (2), P.F. Jones, M. Thorneycroft   / J. Loxham
STC M,  31/1/1982,  P.247
Keywords:
Abstract :
Stiffness measurements as a check of machine tool spindles
C.A. Van Luttervelt (2), H.R. Willemse   / A.J. Pekelharing
STC M,  31/1/1982,  P.251
Keywords:
Abstract :
Analysis of self excited vibrations in external cylindrical plunge grinding
E. Salje (1), W. Dietrich  
STC M,  31/1/1982,  P.255
Keywords:
Abstract :
Indirect size control in NC turning
B. Rundqvist   / G. Sohlenius
STC M,  31/1/1982,  P.259
Keywords:
Abstract :
Prediction of the acoustic intensity based on structural deformations
P. Sas, R. Snoeys (1), G. Desanghere  
STC M,  31/1/1982,  P.263
Keywords:
Abstract :
Multi degree of freedom parameter estimation methods for modal analysis
M. Mergeay   / R. Snoeys
STC M,  31/1/1982,  P.269
Keywords:
Abstract :
Machining system for three dimensional curved surface by means of real time control cutting edge envelope
T. Kishinami, K. Saito   / H. Takeyama
STC M,  31/1/1982,  P.275
Keywords:
Abstract :
Noise and vibration in belt grinding at contact wheels
H.K. Tönshoff (1), H. Degenhardt  
STC M,  31/1/1982,  P.281
Keywords:
Abstract :
Maschinendiagnose in der automatisierten Fertigung
M. Weck (1), M. Pascher  
STC M,  31/1/1982,  P.287
Keywords:
Abstract :
A model study of feeddrive for a numerically controlled lathe
P.C. Mulders, J.A.J. Oosterling, A.C.H. Van der Wolf (1)  
STC M,  31/1/1982,  P.293
Keywords:
Abstract :
Study on high precision. Low-speed hydrodynamic bearing
LeeYingzhong   / J. Peters
STC M,  31/1/1982,  P.299
Keywords:
Abstract :
A method to localize the most important errors in a mathematical model using modal tests
L.P. Bugeat (2)   / J. Lombard
STC M,  31/1/1982,  P.305
Keywords:
Abstract :
Dynamic simulation system for NC turning programs
G. Spur (1), A. Potthast  
STC M,  31/1/1982,  P.309
Keywords:
Abstract :

 STC O 
Computer-aided design of the part spectrum data base
J. Peklenik (1), J. Grum  
STC O,  31/1/1982,  P.313
Keywords:
Abstract :
Production scheduling of flexible manufacturing systems
K. Iwata (2), Y. Murotsu, F. Oba, K. Yasuda   / K. Okamura
STC O,  31/1/1982,  P.319
Keywords:
Abstract :
Computer aided programming of NC-machine tools by using the system AUTAP-NC
W. Eversheim (1), B. Holz  
STC O,  31/1/1982,  P.323
Keywords:
Abstract :
The integration of CAD and CAM by application of artificial-intelligence techniques
K. Matsushima, N. Okada, T. Sata (1)  
STC O,  31/1/1982,  P.329
Keywords:
Abstract :
Qualitative and quantitative use of design and manufacturing axioms
N.P. Suh (1), J.R. Rinderle  
STC O,  31/1/1982,  P.333
Keywords:
Abstract :
Economic feasibility of a new process
G.L. Ravignani (1), V.A. Tipnis, S.J. Mantel  
STC O,  31/1/1982,  P.339
Keywords:
Abstract :
Group technology based production system. An important strategy for developing nations
S. Rajesham, K.V. Mahesh, V.C. Venkatesh (1)  
STC O,  31/1/1982,  P.341
Keywords:
Abstract :
Control of machine tools using the fuzzy control technique
J.H. Zhu, A.A. Shumsheruddin, J.G. Bollinger (1)  
STC O,  31/1/1982,  P.347
Keywords:
Abstract :
An emprical formula to determine the production times of turned components
D.J. Woods, T.R. Crossley (2)   / A.W.J. Chisholm
STC O,  31/1/1982,  P.353
Keywords:
Abstract :
A generalized simulator for automatic transfer line systems
S.S. Law   / V.C. Venkatesh
STC O,  31/1/1982,  P.359
Keywords:
Abstract :
Simulation of manufacturing systems using SIMAN
D. Pedgen, I. Ham (1)  
STC O,  31/1/1982,  P.365
Keywords:
Abstract :
Computer aided planning of manual assembly workplaces
H.J. Warnecke (1), E. Haller  
STC O,  31/1/1982,  P.371
Keywords:
Abstract :
Parts presentation and feeding for robot assembly
G. Boothroyd (1), P. Dewhurst  
STC O,  31/1/1982,  P.377
Keywords:
Abstract :
Optimizing the performance of robots in manufacturing machine systems
J.R. Crookall (1)  
STC O,  31/1/1982,  P.383
Keywords:
Abstract :
Optimierung von Robotersteuerungen
G. Spur (1), G. Duelen  
STC O,  31/1/1982,  P.387
Keywords:
Abstract :
An intelligent force controlled robot
H. Van Brussel, J. Simons, J. Deschutter   / J. Peters
STC O,  31/1/1982,  P.391
Keywords:
Abstract :
A master-slave controller for a flexible manufacturing system
D. French (1), Wei-Wen Lu, Z.X. Yang  
STC O,  31/1/1982,  P.397
Keywords:
Abstract :

 STC P(Q) 
Infrared two-wavelength interferometry for measuring long length
H. Matsumoto, S. Seino   / T. Hoshi
STC P(Q),  31/1/1982,  P.401
Keywords:
Abstract :
On the setting of the light source for the grid illuminating type Moiré method
K. Murakami, Y. Murakami, T. Seino   / A. Kobayashi
STC P(Q),  31/1/1982,  P.405
Keywords:
Abstract :
Some aspects of the design and development of a large high precision CNC diamond turning
W.J. Wills-Moren, H. Modjarrad, R.F.J. Read   / P.A. McKeown
STC P(Q),  31/1/1982,  P.409
Keywords:
Abstract :
Two-dimensional tracing and measurement using touch trigger probes
J.C. Lu, N.A. Duffie, J.G. Bollinger (1)  
STC P(Q),  31/1/1982,  P.415
Keywords:
Abstract :
Development of modular-type measuring
K. Iwata (2), T. Moriwaki (2), S. Ueno   / K. Uehara
STC P(Q),  31/1/1982,  P.421
Keywords:
Abstract :
Accuracy of commercially available laser measurement systems
P.H.J. Schellekens, J. Koning, P.C. Veenstra (1)  
STC P(Q),  31/1/1982,  P.427
Keywords:
Abstract :

 STC Q 
Influences affecting surface integrity in the cutting process
P. Leskovar (2), J. Peklenik (1)  
STC Q,  31/1/1982,  P.447
Keywords:
Abstract :

 STC S 
A study on the functional properties of a honed surface
M. Santochi, M. Vignale   / F. Giusti
STC S,  31/1/1982,  P.431
Keywords:
Abstract :
Tough-hard composite materials substrate-interface-coating relationships
H.E. Hintermann   / P. Dinichert
STC S,  31/1/1982,  P.435
Keywords:
Abstract :
Evolution of residual stresses during turning and cylindrical grinding of a carbon steel
S. Torbaty, A. Moisan (1), J.L. Lebrun, G. Maeder  
STC S,  31/1/1982,  P.441
Keywords:
Abstract :
Prevision of thermal residual stresses in surface plunge grinding of steels
N. Skalli, A. Turbat, J.F. Flavenot   / R. Geslot
STC S,  31/1/1982,  P.451
Keywords:
Abstract :
Surface roughness measurement by scanning electron microscope
H. Sato (2), M. O-Hori   / K. Nakayama
STC S,  31/1/1982,  P.457
Keywords:
Abstract :
The extension of optical angular scattering techniques to the measurement of intermediate scale roughness
E.G. Thwaite (2)   / M.J. Puttock
STC S,  31/1/1982,  P.463
Keywords:
Abstract :
The surface topography of journals
W.R. De Vries (2)   / L.V. Colwell
STC S,  31/1/1982,  P.467
Keywords:
Abstract :