THE INTERNATIONAL ACADEMY FOR PRODUCTION ENGINEERING

LOG IN FOR MEMBERS

CIRP ANNALS 1979

GO TO STC: A C Dn E F G M O P S Cross-STC

 STC C 

The effect of chip breaker constraints on the mechanics of the machining process
P. Dewhurst   / A.W.J. Chisholm
STC C,  28/1/1979,  P.1
Keywords:
Abstract :
The influence of cutting speed variations on tool wear for optimal control of machining
P. Martin, J. Richard, M. Veron (2)   / R. Weill
STC C,  28/1/1979,  P.7
Keywords:
Abstract :
Thermo-mechanical failure of cemented carbide tools in intermittent cutting
P.C. Pandey, S.M. Bhatia, H.S. Shan   / V.C. Venkatesh
STC C,  28/1/1979,  P.13
Keywords:
Abstract :
Fracture of metal cutting tools
M.C. Shaw (1)  
STC C,  28/1/1979,  P.19
Keywords:
Abstract :
Tool wear and cutting temperature of CBN tool in machining of hardened steels
N. Narutaki, Y. Yamane   / K. Okushima
STC C,  28/1/1979,  P.23
Keywords:
Abstract :
Evaluation of cutting tool toughness through non-cutting test
M. Hirao, U. Kasuya, R. Murata, H. Takeyama (1)  
STC C,  28/1/1979,  P.29
Keywords:
Abstract :
Correlation between evolution of tool piece thermoelectric force and tool wear during machinability fast tests
B. Roumesy, C. Bedrin   / R. Weill
STC C,  28/1/1979,  P.35
Keywords:
Abstract :
An automatic tool wear monitoring in NC turning
K. Uehara (1), F. Miyosawa, H. Takeshita  
STC C,  28/1/1979,  P.39
Keywords:
Abstract :
Recognition and control of the morphology of tool failures
K. Matsushima, T. Kawabata, T. Sata (1)  
STC C,  28/1/1979,  P.43
Keywords:
Abstract :
Real-time computer diagnostics (a research tool for metal cutting)
L.V. Colwell (1), J.C. Mazur  
STC C,  28/1/1979,  P.49
Keywords:
Abstract :
General model of the cutting tool
S. Enache (1), V. Tache, D. Catrina, I. Popescu  
STC C,  28/1/1979,  P.53
Keywords:
Abstract :
Qualification of lubricants by energetic measures
D. Bizeul (2), F. Le Maître (1)  
STC C,  28/1/1979,  P.59
Keywords:
Abstract :
Dynamics of single-tooth milling
P.E. Gygax   / E. Matthias
STC C,  28/1/1979,  P.65
Keywords:
Abstract :
Ubertragung bekannter Schnittdaten auf mehrachsiges Fräsen
P. Meier, F. Rehsteiner   / E. Matthias
STC C,  28/1/1979,  P.71
Keywords:
Abstract :
Possibilities to avoid built-up edges in gear hobbing
W. Koenig (1), J. Tondorf, K. Bouzakis  
STC C,  28/1/1979,  P.77
Keywords:
Abstract :
Helix angle and drill performance
G. Lorenz (1)  
STC C,  28/1/1979,  P.83
Keywords:
Abstract :
Thrust and torque prediction in drilling from a cutting mechanics approach
S. Wiriyacosol, E.J.A. Armarego   / G. Lorenz
STC C,  28/1/1979,  P.87
Keywords:
Abstract :

 STC E 

Electromechanical turning, considerations concerning possible machining speed
H. Dietz, K.G. Gunther (2), K. Otto, G. Stark   / W. Rosenkranz
STC E,  28/1/1979,  P.93
Keywords:
Abstract :
Les techniques d'ébavurages. Possibilités de l'usinage chimique
M. Querry   / A. Moisan
STC E,  28/1/1979,  P.99
Keywords:
Abstract :
A new approach on electrochemical finishing of hardened cylindrical gear tooth face
G. Capello, S. Bertoglio, A. Dapiran   / G.F. Micheletti
STC E,  28/1/1979,  P.103
Keywords:
Abstract :
Transformation hardening with CO2 laser for the carbon tool steel
S. Kimura, Y. Nagano, N. Hoshina (2), A. Kobayashi (1)  
STC E,  28/1/1979,  P.109
Keywords:
Abstract :
A laser cutting of aluminum thin film with no damage to under-layers
M. Mitani, Y. Yamaguchi, M. Hongo, T. Miyauchi   / N. Taniguchi
STC E,  28/1/1979,  P.113
Keywords:
Abstract :
Evaluation of frontal and lateral gaps in EDM from breakdown data
F. Balleys, C. Frei   / E. Matthias
STC E,  28/1/1979,  P.117
Keywords:
Abstract :
Influence of the dielectric fluid's renewal in spark erosion
B. Bommeli, J. Pfau   / A. Mottu
STC E,  28/1/1979,  P.121
Keywords:
Abstract :
A theory of planar electrode face wear in EDM
J.R. Crookall (1)  
STC E,  28/1/1979,  P.125
Keywords:
Abstract :

 STC F 

Combined numerical and algebraic computer processing applied to plasticity problems
J.P. Mouton   / P.O. Strandell
STC F,  28/1/1979,  P.131
Keywords:
Abstract :
A method for smoothing experimental flow patterns
L.E. Farmer, S. Conning   / P.L.B. Oxley
STC F,  28/1/1979,  P.135
Keywords:
Abstract :
Comparison of different numerical methods for the calculation of metal forming processes
K. Roll   / K. Lange
STC F,  28/1/1979,  P.141
Keywords:
Abstract :
Forming limit diagrams for sheet metal
M.C. Shaw (1), J. Avery  
STC F,  28/1/1979,  P.147
Keywords:
Abstract :
An identation test as an indicator of workability
C.M. McKenney, W.B. Rice (1)  
STC F,  28/1/1979,  P.151
Keywords:
Abstract :
Distribution of partial drawing and fracturing loads in cup drawing along punch periphery
Y. Tozawa (2), N. Kanetake   / H. Kudo
STC F,  28/1/1979,  P.155
Keywords:
Abstract :
Determination of friction and wear characteristics of some lubricants and tool materials for cold forging with the simulation testing machine
H. Kudo (1), M. Tsubouchi, Y. Fukuhara, Y. Ito  
STC F,  28/1/1979,  P.159
Keywords:
Abstract :
Wear testing of die materials rubbing against aluminum and copper
B. Mills, A.H. Redford   / A.W.J. Chisholm
STC F,  28/1/1979,  P.165
Keywords:
Abstract :
Analysis of the stresses in the corner zone of a C-frame press
U.P. Singh, P.C. Veenstra (1), J.A.G. Ramaekers  
STC F,  28/1/1979,  P.171
Keywords:
Abstract :
On the deposition forming os steels
J.M. Alexander (1), M.S. Dhillon  
STC F,  28/1/1979,  P.177
Keywords:
Abstract :
Computer-aided planning of sheared sheets and slit coils for subsequent blanking
T. Nakagawa (2), H. Yokoi   / H. Kudo
STC F,  28/1/1979,  P.183
Keywords:
Abstract :

 STC G 

Roughness measuring device for controlling grinding process
E. Salje   / G. Pahlitzsch
STC G,  28/1/1979,  P.189
Keywords:
Abstract :
Numerically controlled elastic emission machining
H. Tsuwa (1), N. Ikawa, Y. Mori, K. Sugiyama  
STC G,  28/1/1979,  P.193
Keywords:
Abstract :
Profiling of boron nitride wheels
H.K. Toenshoff (1), G. Geisweid  
STC G,  28/1/1979,  P.199
Keywords:
Abstract :
A new method of characterizing grinding wheels
K.V. Kumar, M.C. Shaw (1)  
STC G,  28/1/1979,  P.205
Keywords:
Abstract :
Negative rake cutting to simulate chip formation in grinding
S. Malkin   / E. Lenz
STC G,  28/1/1979,  P.209
Keywords:
Abstract :
Selection of creep feed grinding conditions in view of workpiece burning
Y. Furukawa, S. Ohishi, S. Shiozaki   / K. Okamura
STC G,  28/1/1979,  P.213
Keywords:
Abstract :
Precision grinding of cristalline materials with resin bonded fine grained diamond wheels
Y. Ueno, S. Miyake, K. Kuroda, J. Watanabe   / A. Kobayashi
STC G,  28/1/1979,  P.219
Keywords:
Abstract :
The use of the auto-correlation function to monitor the behaviour of coated abrasives
M.S. Hamed, W.H. Mackie, T.C. Buttery   / D.J. Whitehouse
STC G,  28/1/1979,  P.225
Keywords:
Abstract :

 STC M 

Estimation of dynamic behaviour of working machine-tools by cepstral averaging
G. Staufert, J.P. Tschudi, F. Bonzanigo   / E. Matthias
STC M,  28/1/1979,  P.229
Keywords:
Abstract :
Stiffness and damping identification of the elements of a machine-tool structure
T. Inamura, T. Sata (1)  
STC M,  28/1/1979,  P.235
Keywords:
Abstract :
Computer-aided design improvement of machine tool structure incorporating joint dynamics data
M. Yoshimura   / K. Okushima
STC M,  28/1/1979,  P.241
Keywords:
Abstract :
Calculation of thermal deformation of machine tools, in transient state, with the effect of structural joints taken into account
M.H. Attia, L. Kops (2)   / W.B. Rice
STC M,  28/1/1979,  P.247
Keywords:
Abstract :
Constraints adaptive control with flexible end milling
J. Tlusty (1), M. Elbestawi  
STC M,  28/1/1979,  P.253
Keywords:
Abstract :
Discrete-time position control at NC-machines. Parameter and system optimization
G. Stute (1), J. Hesselbach  
STC M,  28/1/1979,  P.257
Keywords:
Abstract :
Machining reliability in NC-turning
A. Kinnander   / G. Sohlenius
STC M,  28/1/1979,  P.263
Keywords:
Abstract :
NC programming of rules surfaces for five-axis-machining
G. Stute (1), A. Storr, W. Sielaff  
STC M,  28/1/1979,  P.267
Keywords:
Abstract :
Micro-processor base direct numerical control systems
T.R. Crossley (2), D. McCartney, A.W.J. Chisholm  
STC M,  28/1/1979,  P.273
Keywords:
Abstract :
Possibilities for noise reduction at axial-piston pumps with variable displacement
H.R. Victor (1), B. Stich, E. Lechner, H. Hörner  
STC M,  28/1/1979,  P.277
Keywords:
Abstract :
Interaction of the dynamic behaviour between machine tool and cutting process for grinding
M. Weck (1), K.H. Schiefer  
STC M,  28/1/1979,  P.281
Keywords:
Abstract :
Industrial experiences made with hydrostatic bearings and guideways
P. Fort   / E. Matthias
STC M,  28/1/1979,  P.287
Keywords:
Abstract :
A combined method for the technological forecasting of machine-tool performance
V.R. Milacic (2), M. Glavonjic   / V. Solaja
STC M,  28/1/1979,  P.293
Keywords:
Abstract :
Rotational speed limits for basic types of chucks
M.J. Kalajdzic, V.B. Solaja (1)  
STC M,  28/1/1979,  P.297
Keywords:
Abstract :

 STC Me 

Lasers for dimensional measurement
R.J. Hocken (2), H.P. Layer   / R.D. Young
STC Me,  28/1/1979,  P.303
Keywords:
Abstract :
Wavelengh stability of He-Ne lasers used in interferometry : limitations and traceability
P.H.J. Schellekens, J. Höning   / P.A. McKeown
STC Me,  28/1/1979,  P.307
Keywords:
Abstract :
Anwendung des Laserinterferometers in der Fertigungsmesstechnik
H. Kunzmann   / G. Pahlitzsch
STC Me,  28/1/1979,  P.311
Keywords:
Abstract :
Positioning system with laser for automatical micro spot laser welding
A. Ono, T. Komatsu, N. Hoshina (2), A. Kobayashi (1)  
STC Me,  28/1/1979,  P.317
Keywords:
Abstract :
A length measuring system
J. Pettavel   / A. Mottu
STC Me,  28/1/1979,  P.321
Keywords:
Abstract :
A review of the single flank method for testing gears
R.G. Munro   / A. Mottu
STC Me,  28/1/1979,  P.325
Keywords:
Abstract :
Measurement of the mating geometry of two surfaces
J.N. Brecker (2), L.Y. Shum   / M.C. Shaw
STC Me,  28/1/1979,  P.331
Keywords:
Abstract :
In-process control of workpiece dimension in turning
M. Shiraishi   / K. Uehara
STC Me,  28/1/1979,  P.333
Keywords:
Abstract :
The accuracy of machine tools under load conditions
R. Schultschik (2)   / P. Dinichert
STC Me,  28/1/1979,  P.339
Keywords:
Abstract :

 STC O 

Design for economic manufacture
G. Boothroyd (2)   / E. Merchant
STC O,  28/1/1979,  P.345
Keywords:
Abstract :
Development of a process planning system for the pressure vessels
K. Matsushima, T. Katayama, T. Sata (1), T. Yoshizumi, K. Azumi  
STC O,  28/1/1979,  P.351
Keywords:
Abstract :
Demands and experiences from the introduction of a work planning system in practice
H.K. Toenshoff (1), K.D. Meyer  
STC O,  28/1/1979,  P.357
Keywords:
Abstract :
Planning and utilization of production flexibility
W. Eversheim (1), F.W. Schaefer  
STC O,  28/1/1979,  P.361
Keywords:
Abstract :
On the choice of tool life relationships with consideration for its economical implications
G.F. Ravignani (1), Q. Semeraro  
STC O,  28/1/1979,  P.367
Keywords:
Abstract :
Tool life distribution in process optimization : parameters identification and applications
A. Zompi   / R. Levi
STC O,  28/1/1979,  P.371
Keywords:
Abstract :
Design and analysis of computerized manufacturing systems (CMS)
N.H. Cook, E. Merchant (1)  
STC O,  28/1/1979,  P.377
Keywords:
Abstract :
Workload optimization in a FMS modelled as a closed network of queues
G.M. Secco Suardo   / G.F. Micheletti
STC O,  28/1/1979,  P.381
Keywords:
Abstract :
Structure of modular systems for handling devices using micro-computers
M. Weck (1), D'Souza  
STC O,  28/1/1979,  P.385
Keywords:
Abstract :
Computer algorithms for high speed continuous-path robot manipulation
J.G. Bollinger (1), N. Duffie  
STC O,  28/1/1979,  P.391
Keywords:
Abstract :
Robot assembly by active force feedback accomodation
H. Van Brussel, J. Simons   / J. Peters
STC O,  28/1/1979,  P.397
Keywords:
Abstract :
Flexible assembly systems for different cores in electric machines and transformers
K. Feldmann, K.G. Gunther (2), R.P. Hartmann   / W. Rosenkranz
STC O,  28/1/1979,  P.403
Keywords:
Abstract :
Application of group technology to manufacture of sheet metal components
C.V. Nagarkar, B. Fogg (2)   / A.W.J. Chisholm
STC O,  28/1/1979,  P.407
Keywords:
Abstract :

 STC S 

Der Einfluss der Oberflächen rauheit auf die Reibung in Kolben-Zylinder-Systemen
K. Tuffentsammer (1), H.J. Engel  
STC S,  28/1/1979,  P.413
Keywords:
Abstract :
Two dimensional measurement of surface roughness by the light sectioning method
S. Uchida, H. Sato, M. O-Hori   / N. Takenaka
STC S,  28/1/1979,  P.419
Keywords:
Abstract :
A chemo-mechanical ultra fine finishing of polycristalline materials
Y. Namba, H. Tsuwa (1)  
STC S,  28/1/1979,  P.425
Keywords:
Abstract :
Characterization of random roughness-profiles. A comparison of AR-modelling technique and profile description by means of commonly used parameters
G. Staufert   / E. Matthias
STC S,  28/1/1979,  P.431
Keywords:
Abstract :
Autoregressive time series models for surface profile characterization
W.R. De vries   / L.V. Colwell
STC S,  28/1/1979,  P.437
Keywords:
Abstract :