THE INTERNATIONAL ACADEMY FOR PRODUCTION ENGINEERING

Log in

CIRP ANNALS 1978

GO TO STC:

 STC C 

Is the machining process uniquely defined ?
P. Dewhurst   / A.W.J. Chisholm
STC C,  27/1/1978,  P.1
Keywords:
Abstract :
The exit failure in interrupted cutting
A.J. Pekelharing (1)  
STC C,  27/1/1978,  P.5
Keywords:
Abstract :
Entrance angle in milling and dynamic stress waves propagation in the tool
D. Bizeul, F. Le Maître (1)  
STC C,  27/1/1978,  P.11
Keywords:
Abstract :
Basic rules on the form of chip in metal cutting
K. Nakayama (2)   / H. Takeyama
STC C,  27/1/1978,  P.17
Keywords:
Abstract :
Reliability and life distribution of ceramic tools during face milling
S.M. Pandit, C.H. Khang (2)   / M.C. Shaw
STC C,  27/1/1978,  P.23
Keywords:
Abstract :
Determination experimentale de l'usure d'outils en carbures metalliques en fraisage de face
A. Moisan (1), F. Lapujoulade, I.H. Selim, G. Chabrely  
STC C,  27/1/1978,  P.29
Keywords:
Abstract :
On the tool life of high speed steel tools
B.F. Von Turkovich (1), W.E. Henderer  
STC C,  27/1/1978,  P.35
Keywords:
Abstract :
Constant feed force machinability testing - further development and industrial applications
B. Lindgren   / O. Svahn
STC C,  27/1/1978,  P.39
Keywords:
Abstract :
A machining study of leaded alpha/beta brasses
B. Mills, A.H. Redford   / A.W.J. Chisholm
STC C,  27/1/1978,  P.45
Keywords:
Abstract :
Investigation in drilling
E. Lenz (1), J.E. Mayer, D.G. Lee  
STC C,  27/1/1978,  P.49
Keywords:
Abstract :
Chip formation and chip flow in milling of wood
G. Pahlitzsch (1), K. Dziobek, K. Puttkammer  
STC C,  27/1/1978,  P.55
Keywords:
Abstract :
Statistical characteristics of drill wear and drill life for the standardized performance tests
M. Kanai, S. Fujii, K. Iwata (2), Y. Kanda   / Y. Tomonaga
STC C,  27/1/1978,  P.61
Keywords:
Abstract :
Frequency characteristic of cutting process identified by an in-process measurement of surface roughness
K. Mitsui, H. Sato   / N. Takenaka
STC C,  27/1/1978,  P.67
Keywords:
Abstract :
Micro-isotope tool wear sensor
N.H. Cook, K. Subramanian   / E. Merchant
STC C,  27/1/1978,  P.73
Keywords:
Abstract :
Investigation on some wear parameters of CVD layers on carbides by a scanning electron microscope
P. Karapentev   / K. Iliev
STC C,  27/1/1978,  P.79
Keywords:
Abstract :

 STC E 

The electrochemical contact machining : Principles and application
K. Iliev (1), M. Manolov  
STC E,  27/1/1978,  P.87
Keywords:
Abstract :
Effect of a magnetic field on the gap cleaning in EDM
H.E. De Bruijn   / A.J. Pekelharing
STC E,  27/1/1978,  P.93
Keywords:
Abstract :
Surface generation in electrochemical machining
W. Koenig (1), P. Lindenlauf  
STC E,  27/1/1978,  P.97
Keywords:
Abstract :
Technological surfaces, an objective criterion for comparing EDM systems
H. Cornelissen, R. Snoeys (1), J.P. Kruth  
STC E,  27/1/1978,  P.101
Keywords:
Abstract :
Electrochemical grinding with magnetic field
G. Kuppuswamy, V.C. Venkatesh (1)  
STC E,  27/1/1978,  P.107
Keywords:
Abstract :
An analysis of EDM utilisation in industrial tooling manufacture
J.R. Crookall (1)  
STC E,  27/1/1978,  P.113
Keywords:
Abstract :
An appraisal of wear mechanisms in ultrasonic drilling
M. Adithan, V.C. Venkatesh (1)  
STC E,  27/1/1978,  P.119
Keywords:
Abstract :

 STC F 

Application of computer-aided techniques to precision closed-die forging
T.L. Subramanian, T. Altan (2)   / F.W. Boulger
STC F,  27/1/1978,  P.123
Keywords:
Abstract :
A planned experiment approach to investigating metalworking processes
L.E. Farmer   / P.L.B. Oxley
STC F,  27/1/1978,  P.129
Keywords:
Abstract :
Prediction of ductile fracture in cold forging
K. Osakada, K. Mori   / H. Kudo
STC F,  27/1/1978,  P.135
Keywords:
Abstract :
Formability limits and fracturing modes of uniaxial compression specimens
S. Kivivuori, M. Sulonen   / P.O. Strandell
STC F,  27/1/1978,  P.141
Keywords:
Abstract :
Experimental investigation of surface cracking during hydrostatic extrusion using wax to simulate metal
J.N. Garner, W.B. Rice (1)  
STC F,  27/1/1978,  P.147
Keywords:
Abstract :
Deformation analysis of multi-pass bar drawing and extrusion
C.C. Chen, S. Kobayashi (1)  
STC F,  27/1/1978,  P.151
Keywords:
Abstract :
A criterion for critical tool wear in blanking
P.C. Veenstra (1), J.A.H. Ramaekers  
STC F,  27/1/1978,  P.157
Keywords:
Abstract :
Blanking of sheet metal relationship between process conditions and fracture of cut edge
H. Schenk, E. Prölss, K.G. Guenther (2)   / W. Rosenkranz
STC F,  27/1/1978,  P.159
Keywords:
Abstract :
Study of cold pressure welding by divergent extrusion
H. Kudo (1), Y. Kikuchi, K. Miyazaki  
STC F,  27/1/1978,  P.165
Keywords:
Abstract :
Druckbestimmung beim Tiefziehen von konischen Elementen mit Wirkmedien
V. Stoiljkovic, p. Popovic   / V. Solaja
STC F,  27/1/1978,  P.171
Keywords:
Abstract :
Blanking and piercing without any burr
K. Lange (1), H. Liebing  
STC F,  27/1/1978,  P.177
Keywords:
Abstract :
Calculation of pressure distribution and oil flow and film thickness in externally pressurised lubrication in sheet metal forming
B. Fogg (2), M.K.A. Owais   / A.W.J. Chisholm
STC F,  27/1/1978,  P.183
Keywords:
Abstract :
A model for friction in metal forming process
T. Wanheim   / P.O. Strandell
STC F,  27/1/1978,  P.189
Keywords:
Abstract :
An experiment on the use of ultrasonic vibrations in cold upsetting
G. Perotti (2)   / G.F. Micheletti
STC F,  27/1/1978,  P.195
Keywords:
Abstract :
High velocity forming of metal plate by exploding wires in gas
M. Motoki, I. Fujita, K. Muramatsu   / N. Taniguchi
STC F,  27/1/1978,  P.199
Keywords:
Abstract :

 STC G 

Grinding processes considered as feedback control systems
E. Salje   / G. Pahlitzsch
STC G,  27/1/1978,  P.205
Keywords:
Abstract :
What is the ideal grinding wheel ?
K. Okamura (1), S. Tsukamoto  
STC G,  27/1/1978,  P.211
Keywords:
Abstract :
Loading of the grinding wheel phenomenon
W. Koenig (1), H. Lauer-Schmaltz  
STC G,  27/1/1978,  P.217
Keywords:
Abstract :
Superhard abrasives and adapted bonds for internal grinding
H.K. Toenshoff (1), B. Jurgenhacke  
STC G,  27/1/1978,  P.221
Keywords:
Abstract :
Predictive measurement of the sparkout roughness during the plunge grinding operation
J. Verkerk (2)   / A.J. Pekelharing
STC G,  27/1/1978,  P.227
Keywords:
Abstract :
Burning limit for surface and cylindrical grinding of steels
S. Malkin   / E. Lenz
STC G,  27/1/1978,  P.233
Keywords:
Abstract :
A proposal for some functional characteristic parameters of abrasive grinding wheels
C.B. Bhateja   / R.S. Hahn
STC G,  27/1/1978,  P.237
Keywords:
Abstract :
Influence of work material on grinding forces
G. Werner   / W. Koenig
STC G,  27/1/1978,  P.243
Keywords:
Abstract :
A new standard of proper selection of grinding wheels in plunge operation
T. Nakajima   / K. Okamura
STC G,  27/1/1978,  P.249
Keywords:
Abstract :
On the surface nature of diamond wheel in the process of grinding carbon steel
Y. Yuhta, S. Igarashi, R. Okuno, T. Satoh   / A. Kobayashi
STC G,  27/1/1978,  P.255
Keywords:
Abstract :

 STC M 

A modular function-orientated multiprocessor-NC-system
G. Stute (1), H. Worn  
STC M,  27/1/1978,  P.261
Keywords:
Abstract :
Microprocessors in hierarchical control systems
H. Van Brussel, J. Simons   / J. Peters
STC M,  27/1/1978,  P.265
Keywords:
Abstract :
Accuracy control of machine tool by means of independent optical axes
K. Takada, H. Takeyama (1)  
STC M,  27/1/1978,  P.271
Keywords:
Abstract :
Calculation of the kinematic behaviour and the load capacity of bevel gears
M. Weck (1), P. Gold, O. Guzman, B. Neupert, M. Schoerner  
STC M,  27/1/1978,  P.277
Keywords:
Abstract :
High precision cutting with a new ultra precision spindle
A. Kobayashi (1), N. Hoshina (2), T. Tsukada, K. Ueda  
STC M,  27/1/1978,  P.283
Keywords:
Abstract :
Hydrostatic thrust bearings in axial piston pumps for use in hydraulic systems
H.R. Victor (1), A. Weber, H.J. Stierle  
STC M,  27/1/1978,  P.289
Keywords:
Abstract :
An analysis of dynamic performance of half-floating slide ways and its application to machine tool feed drive systems
H. Furukawa, M. Mizukane, S. Shiozaki   / N. Takenaka
STC M,  27/1/1978,  P.295
Keywords:
Abstract :
The system plate-pillar in the computer analysis of presses and die-sets
J.A.W. Hijink, A.C.H. Van der Wolf (1)  
STC M,  27/1/1978,  P.301
Keywords:
Abstract :
On the role of fixed joints in thermal deformation of machine tool structures
M.H. Attia, L. Kops (2)   / W.B. Rice
STC M,  27/1/1978,  P.305
Keywords:
Abstract :
A bearing with adjustable stiffness for application in machine tools
H.C. Geljon, G.G. Hirs   / J.L. Remmerswaal
STC M,  27/1/1978,  P.311
Keywords:
Abstract :
La rigidité dynamique des broches et la notion de la capacité dynamique de machines-outils
J. Lombard (1), F. Mirski (2)  
STC M,  27/1/1978,  P.315
Keywords:
Abstract :
The stability of machining with continuously varying spindle speed
J.S. Sexton, B.J. Stone   / A.E. De Barr
STC M,  27/1/1978,  P.321
Keywords:
Abstract :
Effect of a variable stiffness type dynamic absorber on improving the performance of machine tools with a long overhung ram
K. Seto   / K. Uehara
STC M,  27/1/1978,  P.327
Keywords:
Abstract :
Assessing the chatter behaviour of machine tools
M. Weck (1), K. Teipel  
STC M,  27/1/1978,  P.333
Keywords:
Abstract :
Noise reduction in circular sawing of metal
H.K. Toenshoff (1), R. Westphal  
STC M,  27/1/1978,  P.339
Keywords:
Abstract :
Etude théorique et expérimentale de la résistance thermique de contact
J. Lombard (1), P.J. Duchaine (2)  
STC M,  27/1/1978,  P.345
Keywords:
Abstract :

 STC Me 

Large-scale metrology
M.J. Puttock   / G. Lorenz
STC Me,  27/1/1978,  P.351
Keywords:
Abstract :
Multiple redundancy in the measurement of large structures
R.J. Hocken, W.C. Haight   / R.D. Young
STC Me,  27/1/1978,  P.357
Keywords:
Abstract :
A new technique for surface shape investigation
C. Wykes, R. Jones, J.N. Butters   / P.A. McKeown
STC Me,  27/1/1978,  P.361
Keywords:
Abstract :
New methods of evaluating axis of rotation error
T.S.R. Murthy, C. Mallanna, M.E. Visveswaran   / V.C. Venkatesh
STC Me,  27/1/1978,  P.365
Keywords:
Abstract :
In Situ measurement of cylindricity
Y. Kakino, J. Kitazawa   / K. Okushima
STC Me,  27/1/1978,  P.371
Keywords:
Abstract :
Investigation on granite as a material for metrology aids
S.Z. Abdin, R. Shenoy, M.E. Visveswaran   / A. Bhattacharyya
STC Me,  27/1/1978,  P.377
Keywords:
Abstract :

 STC O 

Optimization of manufacturing systems through axiomatics
N.P. Suh (2), S. Kim, A. Bell, D. Wilson, N. Cook, N. Lapidot   / B.F. Von Turkovich
STC O,  27/1/1978,  P.383
Keywords:
Abstract :
Production Flow Synthesis : a panacea for the design of product oriented production systems ?
C. De Beer (1), J. De Witte  
STC O,  27/1/1978,  P.389
Keywords:
Abstract :
The role of buffer storage capacity in balanced and unbalanced transfer line systems
K. Okamura (1), H. Yamashina  
STC O,  27/1/1978,  P.393
Keywords:
Abstract :
Organizational control and supervision of control data processing in integrated manufacturing systems
G. Stute (1), A. Storr, W. Doettling, J. Firnau  
STC O,  27/1/1978,  P.399
Keywords:
Abstract :
A decade of direct numerical control
T.R. Crossley (2), D. McCartney   / A.W.J. Chisholm
STC O,  27/1/1978,  P.405
Keywords:
Abstract :
The influence of associated factors on the optimization of fabrication
G. Gerber   / E. Matthias
STC O,  27/1/1978,  P.409
Keywords:
Abstract :
Algorithms of operation and structures of ACC controllers for rough turning
S. Spiewak, M. Szafarczyck (2)   / J. Kaczmarek
STC O,  27/1/1978,  P.413
Keywords:
Abstract :
On an adaptive optimization model of manufacturing processes
J. Stanic, V. Solaja (1)  
STC O,  27/1/1978,  P.419
Keywords:
Abstract :
Experience with manual adaptive control
M.C. Shaw (1), J. Avery, J. Frankman  
STC O,  27/1/1978,  P.425
Keywords:
Abstract :
The design of manual flow lines with the use of simulation
H.J. Warnecke (1), H.J. Bullinger, H.P. Lentes  
STC O,  27/1/1978,  P.429
Keywords:
Abstract :
Classification for automatic assembly of small products
K.G. Swift, A.H. Redford   / A.W.J. Chisholm
STC O,  27/1/1978,  P.435
Keywords:
Abstract :
Orientation of small parts, considerations concerning the multi-handling method
W. Baumann, K.G. Guenther (2), J. Haeusler   / W. Rosenkranz
STC O,  27/1/1978,  P.441
Keywords:
Abstract :
Optimization of selection of machine tools, loading sequence of parts and machining conditions in job-shop type machining systems
K. Iwata (2), Y. Murotsu, F. Oba, T. Uemura   / K. Okushima
STC O,  27/1/1978,  P.447
Keywords:
Abstract :
Relative effects of shop variables on manufacturing cost and performance
B. Colding (1)  
STC O,  27/1/1978,  P.453
Keywords:
Abstract :
A computational algorithm for direct application of tool life values in machining economics
G.L. Ravignani (1), Q. Semeraro  
STC O,  27/1/1978,  P.459
Keywords:
Abstract :
A computer aid in the optimization of turning conditions in multi-cut operations
H.J.J. Kals (2), J.A.W. Hijink   / A.C.H. Van der Wolf
STC O,  27/1/1978,  P.465
Keywords:
Abstract :
Group technology and material requirements planning : an integrated methodology for production control
N. Sato, J.P. Ignizio, I. Ham (1)  
STC O,  27/1/1978,  P.471
Keywords:
Abstract :
Analogic part programming with interactive graphics
D. Gossard   / B.F. Von Turkovich
STC O,  27/1/1978,  P.475
Keywords:
Abstract :
Machine tool development and its planning in the future
B. Milcic   / J. Peklenik
STC O,  27/1/1978,  P.479
Keywords:
Abstract :
Development of new machine tool concepts for single and small batch production with special regard to functional requirements and automation
W. Eversheim (1)  
STC O,  27/1/1978,  P.485
Keywords:
Abstract :

 STC S 

Beta functions for surface typology ?
D.J. Whitehouse (1)  
STC S,  27/1/1978,  P.491
Keywords:
Abstract :
Random surface generation - an integrated approach
M.S. Hamed, D.J. Whitehouse (1), T.C. Buttery  
STC S,  27/1/1978,  P.499
Keywords:
Abstract :
Influence of radial motion on form error of workpiece in turning
M. Sawabe, N. Fujinuma   / T. Sata
STC S,  27/1/1978,  P.505
Keywords:
Abstract :
Mechanism and some applications of ultra-fine finishing
Y. Namba, H. Tsuwa   / K. Okamura
STC S,  27/1/1978,  P.511
Keywords:
Abstract :
Ion plated coatings for tribological applications
D.G. Teer, J. Halling   / A.W.J. Chisholm
STC S,  27/1/1978,  P.517
Keywords:
Abstract :
Optimizing grinding parameters to combine high productivity with high surface integrity
M. Field (1), W. Koster  
STC S,  27/1/1978,  P.523
Keywords:
Abstract :
Surface integrity of honed cylinders
G. Balasubramanian, R. Krishnamurthy   / D.J. Whitehouse
STC S,  27/1/1978,  P.527
Keywords:
Abstract :
Testing a new optical sensor for in-process detection of surface roughness
P.M. Lonardo (2)   / G.F. Micheletti
STC S,  27/1/1978,  P.531
Keywords:
Abstract :
The scientific background of cutting tool materials selection
T.N. Loladze (1)  
STC S,  27/1/1978,  P.535
Keywords:
Abstract :