CIRP ANNALS 1977
|
|
|
|
|
STC C |
|
The influence of radial location on the wear behaviour of multi-tooth face milling cutter
|
|
A. Ber (1), D. Feldman
|
|
STC C, 26/1/1977, P.1
|
|
Keywords: |
Abstract :
|
|
On some aspects of wear mechanisms in coated carbide tools
|
|
V.C. Venkatesh (1), A.S. Raju, K. Srinivasan
|
|
STC C, 26/1/1977, P.5
|
|
Keywords: |
Abstract :
|
|
On the chipping phenomena of carbide cutting tools
|
|
K. Uehara (1), Y. Kanda / A. Kobayashi
|
|
STC C, 26/1/1977, P.11
|
|
Keywords: |
Abstract :
|
|
Chip formation in gear-shaping
|
|
W. Koenig (1), K. Bouzakis
|
|
STC C, 26/1/1977, P.17
|
|
Keywords: |
Abstract :
|
|
An application of acoustic emission measurement to in-process sensing of tool wear
|
|
K. Iwata (2), T. Moriwaki / N. Takenaka
|
|
STC C, 26/1/1977, P.21
|
|
Keywords: |
Abstract :
|
|
Microscopic stress analysis of sintered carbide
|
|
M. Hirao, R. Murata, H. Takeyama (1)
|
|
STC C, 26/1/1977, P.27
|
|
Keywords: |
Abstract :
|
|
The split shear-zone-mechanism of chip segmentation
|
|
C.A. Van Luttervelt (2) / A.J. Pekelharing
|
|
STC C, 26/1/1977, P.33
|
|
Keywords: |
Abstract :
|
|
A contribution to the standardization of drill performance tests
|
|
G. Lorenz (1)
|
|
STC C, 26/1/1977, P.39
|
|
Keywords: |
Abstract :
|
|
Tool failure and chip form as restrictions when selecting cutting data
|
|
F.O. Rasch (2), K. Tonnessen / O. Bjoerke
|
|
STC C, 26/1/1977, P.45
|
|
Keywords: |
Abstract :
|
|
Cutting actions of ball end mill with a spiral edge
|
|
T. Hosoi, T. Hoshi (2) / T. Okushima
|
|
STC C, 26/1/1977, P.49
|
|
Keywords: |
Abstract :
|
|
Steel fiber production by machining for reinforced concrete
|
|
T. Nakagawa (2), K. Suzuki / S. Fukui
|
|
STC C, 26/1/1977, P.55
|
|
Keywords: |
Abstract :
|
STC E |
|
The properties of the Seroo gap sensor with wire spark erosion machining
|
|
T. Tanimura, C.J. Heuvelman (2) / P.C. Veenstra
|
|
STC E, 26/1/1977, P.59
|
|
Keywords: |
Abstract :
|
|
Accuracy of the physico-mathematical analysis in EDM process. Correlation with electrode tool wear
|
|
C. Marty (2) / R. Weill
|
|
STC E, 26/1/1977, P.65
|
|
Keywords: |
Abstract :
|
|
The flow fields in the working gap with electro-discharge-machining
|
|
W. Koenig (1), R. Weill (1), R. Wertheim (2)
|
|
STC E, 26/1/1977, P.71
|
|
Keywords: |
Abstract :
|
|
Surface characteristics behaviour due to rough and finish cutting by EDM
|
|
C.H. Kahng (2), K.P. Rajurkar / M.C. Shaw
|
|
STC E, 26/1/1977, P.77
|
|
Keywords: |
Abstract :
|
|
Mathematical model for the calculation of the contour of the anode in electro-chemical machining
|
|
W. Koenig (1), H.J. Hümbs
|
|
STC E, 26/1/1977, P.83
|
|
Keywords: |
Abstract :
|
|
Characteristics of electron beam drilling of metals
|
|
T. Myazaki, S. Yoshioka, T. Kimura / N. Taniguchi
|
|
STC E, 26/1/1977, P.89
|
|
Keywords: |
Abstract :
|
STC F |
|
Determination of pressure distribution over tool surfaces in cold forging with a simple senser
|
|
S. Matsubara, H. Kudo (1)
|
|
STC F, 26/1/1977, P.95
|
|
Keywords: |
Abstract :
|
|
Dynamic sliding friction of plastically deforming polymers
|
|
A. Makinouchi / S. Fukui
|
|
STC F, 26/1/1977, P.101
|
|
Keywords: |
Abstract :
|
|
The effect of reduction ratio and post sintering density on hooker extrusion of short tubes
|
|
W. Thompson, J.K. Russel / R.H. Brown
|
|
STC F, 26/1/1977, P.107
|
|
Keywords: |
Abstract :
|
|
Flanging in sheet metal forming as influenced by tooling geometry
|
|
K. Källström, U. Öhman / P.O. Strandell
|
|
STC F, 26/1/1977, P.113
|
|
Keywords: |
Abstract :
|
|
Numerical analysis of the distrotional behaviour of a hydraulic press
|
|
U.P. Singh, P.C. Veenstra (1), J.A.H. Ramaekers, J.A.W. Kyink
|
|
STC F, 26/1/1977, P.117
|
|
Keywords: |
Abstract :
|
|
Recent developments in the recycling of machining swarfs and blanking scraps by sintering and powder forging
|
|
C.S. Sharma, T. Nakagawa (2), N. Takenaka (1)
|
|
STC F, 26/1/1977, P.121
|
|
Keywords: |
Abstract :
|
STC G |
|
Characterization of wheel-wear in plunge grinding
|
|
J. Verkerk / A.J. Pekelharing
|
|
STC G, 26/1/1977, P.127
|
|
Keywords: |
Abstract :
|
|
Grinding wheel with helical grooves. An attempt to improve the grinding performance
|
|
K. Nakayama (2), J. Takagi, T. Abe / H. Takeyama
|
|
STC G, 26/1/1977, P.133
|
|
Keywords: |
Abstract :
|
|
Role of stylus curvature in grinding wheel surface characterization
|
|
M.C. Shaw (1), R. Komanduri
|
|
STC G, 26/1/1977, P.139
|
|
Keywords: |
Abstract :
|
|
An examination of the wheel work interface using an explosive device to suddenly interrupt the surface grinding process
|
|
R.H. Brown (1), J.G. Wager, J.D. Watson
|
|
STC G, 26/1/1977, P.143
|
|
Keywords: |
Abstract :
|
|
A preliminary investigation on the condition of the grinding wheel surface by air flow measurements
|
|
V. Radhakrishnan, J. Fazlur Rhaman / H. Von Weingraber
|
|
STC G, 26/1/1977, P.147
|
|
Keywords: |
Abstract :
|
|
A study on the temperature variation of workpieces during cylindrical plunge grinding process
|
|
Y. Yamamoto, M. Horike, N. Hoshina (2) / A. Kobayashi
|
|
STC G, 26/1/1977, P.151
|
|
Keywords: |
Abstract :
|
|
Lapping of flat surfaces
|
|
A. Szuder, p. Kapsa, T. Mathia, J.M. Georges / P. Bezier
|
|
STC G, 26/1/1977, P.155
|
|
Keywords: |
Abstract :
|
|
Factors influencing tool life in plunge grinding
|
|
J. Peters (1), R. Aerens
|
|
STC G, 26/1/1977, P.161
|
|
Keywords: |
Abstract :
|
STC M |
|
Angle synchronous sampling for noise reduction in determination of the force related sound spectrum
|
|
H.K. Toenshoff (1), G. Rohr
|
|
STC M, 26/1/1977, P.165
|
|
Keywords: |
Abstract :
|
|
Results from noise reduction activities in a sheet metal-forming workshop
|
|
F.O. Rasch (2), K. Tönnessen / O. Bjoerke
|
|
STC M, 26/1/1977, P.171
|
|
Keywords: |
Abstract :
|
|
Study for practical application of fluctuating speed cutting for regenerative chatter control
|
|
T. Hoshi (2), N. Sakisaka, I. Moriyama, M. Sato, A. Higashimoto, T. Tokunaga / T. Takeyama
|
|
STC M, 26/1/1977, P.175
|
|
Keywords: |
Abstract :
|
|
Computer control of chatering in turning operation
|
|
T. Inamura, T. Sanda, T. Sata (1)
|
|
STC M, 26/1/1977, P.181
|
|
Keywords: |
Abstract :
|
|
Performance analysis and optimization of vierendeel and warren beams
|
|
R.C. Bahl, P.C. Pandey / A.J.P. Sabberwal
|
|
STC M, 26/1/1977, P.187
|
|
Keywords: |
Abstract :
|
|
Measurement of dynamic rigidity and damping property for simplified joint model and simulation by computer
|
|
M. Yoshimura / K. Okushima
|
|
STC M, 26/1/1977, P.193
|
|
Keywords: |
Abstract :
|
|
Influences of surrounding and mounting on thermal behaviour of main spindle-bearings-systems
|
|
G. Spur (1), G. Lechler
|
|
STC M, 26/1/1977, P.199
|
|
Keywords: |
Abstract :
|
|
Self aligning aerostatic shoe bearings
|
|
R. Snoeys (1), L. Devrieze, p. Vanherck (2)
|
|
STC M, 26/1/1977, P.205
|
|
Keywords: |
Abstract :
|
|
Design and test of stepped air servo-actuator
|
|
N. Taniguchi (1), M. Suzuki
|
|
STC M, 26/1/1977, P.211
|
|
Keywords: |
Abstract :
|
|
Programmable controllers (PC) - state of art - development trends - applications
|
|
M. Weck (1), N. Mombauer
|
|
STC M, 26/1/1977, P.217
|
|
Keywords: |
Abstract :
|
STC Me |
|
The components of the volumetric accuracy
|
|
R. Schultschik (2) / E. Matthias
|
|
STC Me, 26/1/1977, P.223
|
|
Keywords: |
Abstract :
|
|
A contribution on three-dimensional measurement of workpieces
|
|
A. Wirtz (2), C. Rinner / H.R. Trumpold
|
|
STC Me, 26/1/1977, P.229
|
|
Keywords: |
Abstract :
|
|
Plain inspection method for measuring error of coordinate measuring machine (CMM)
|
|
H. Yano, T. Nakamura / Y. Tomonaga
|
|
STC Me, 26/1/1977, P.235
|
|
Keywords: |
Abstract :
|
|
New measuring method of rotating accuracy of spindle
|
|
Y. Kakino, Y. Yamamoto, N. Ishii / K. Okushima
|
|
STC Me, 26/1/1977, P.241
|
|
Keywords: |
Abstract :
|
|
Length calibrations in the micrometer and submicrometer range
|
|
R.D. Young (1)
|
|
STC Me, 26/1/1977, P.245
|
|
Keywords: |
Abstract :
|
|
Surface place measurements
|
|
W. De Bruin (2), J. Meijer, A. Nawijn / R. Van Hasselt
|
|
STC Me, 26/1/1977, P.251
|
|
Keywords: |
Abstract :
|
|
Überblick über moderne Verfahren der In-Process-Messung in der Fertigungstechnik
|
|
K. Horn / H. Von Weingraber
|
|
STC Me, 26/1/1977, P.257
|
|
Keywords: |
Abstract :
|
STC O |
|
An investigation into the appropriate application of modern methods of production and management in the engineering industry of Indonesia
|
|
R. Van Hasselt (1), S.H. Wirjomartono, E.J. De Bruijn
|
|
STC O, 26/1/1977, P.263
|
|
Keywords: |
Abstract :
|
|
Flexible cell production systems - a realistic approach
|
|
R. Tilsley (2), F.A. Lewis / D.F. Galloway
|
|
STC O, 26/1/1977, P.269
|
|
Keywords: |
Abstract :
|
|
Survey of mechanical parts manufactured in the French industries
|
|
G. Debrune, U. Vendeville / P. Bezier
|
|
STC O, 26/1/1977, P.273
|
|
Keywords: |
Abstract :
|
|
Machine loading for group technology applications
|
|
K. Hitomi, I. Ham (1)
|
|
STC O, 26/1/1977, P.279
|
|
Keywords: |
Abstract :
|
|
Low-cost mechanisation and automation in assembly by means of a theory of stochastical orientation processes
|
|
V. Baumann, K.G. Günther (2), J. Häusler, G. Lutz / W. Rosenkranz
|
|
STC O, 26/1/1977, P.283
|
|
Keywords: |
Abstract :
|
|
Integrated generation of drawing sheets of operations and NC tapes
|
|
W. Eversheim (1), H. Fuchs
|
|
STC O, 26/1/1977, P.289
|
|
Keywords: |
Abstract :
|
|
Cutting rate tool life function (R-T-F) - General theory and applications
|
|
G.L. Ravignani (1), V.A. Tipnis, M.Y. Friedman
|
|
STC O, 26/1/1977, P.295
|
|
Keywords: |
Abstract :
|
|
Scheduling a multi-product single machine system with variable set up costs
|
|
J. Gunasekera / J.M. Alexander
|
|
STC O, 26/1/1977, P.303
|
|
Keywords: |
Abstract :
|
|
Fundamentals of a planning system for spare part productions
|
|
H.J. Warnecke (1), E. Schultz
|
|
STC O, 26/1/1977, P.307
|
|
Keywords: |
Abstract :
|
|
The calculation of response times in computer based real time production control systems
|
|
A. Rolstadas / O. Bjoerke
|
|
STC O, 26/1/1977, P.313
|
|
Keywords: |
Abstract :
|
|
High performance CNC system for lathes
|
|
F. Lepage, J.P. Musse, M. Véron (2), J.P. Drapier / R. Weill
|
|
STC O, 26/1/1977, P.319
|
|
Keywords: |
Abstract :
|
STC S |
|
Ultra fine finishing of sapphire single crystal
|
|
Y. Namba, H. Tsuwa / Y. Tanaka
|
|
STC S, 26/1/1977, P.325
|
|
Keywords: |
Abstract :
|
|
Quality in service of surface formed in modern active technological medium
|
|
N.G. Meshcheriakov / T.N. Loladze
|
|
STC S, 26/1/1977, P.331
|
|
Keywords: |
Abstract :
|
|
An enveloping profile approach for the generation of ground surface texture
|
|
C.P. Bhateja / E. Merchant
|
|
STC S, 26/1/1977, P.333
|
|
Keywords: |
Abstract :
|
|
A statistical model for predicting surface texture of machined thermo plastics
|
|
P. O'Brien, W. Thompson, J.K. Russel / R.H. Brown
|
|
STC S, 26/1/1977, P.339
|
|
Keywords: |
Abstract :
|
|
Kennwerte des Oberflächenrauhigkeit und ihre Aussagekraft hinsichtlich der Charackterisierung bestimmter Oberflächentypen
|
|
G. Staufert / E. Matthias
|
|
STC S, 26/1/1977, P.345
|
|
Keywords: |
Abstract :
|
|
An investigation of the influence of typical production processes on bearing performance
|
|
T.G. King, K.J. Stout, D.J. Whitehouse (1)
|
|
STC S, 26/1/1977, P.351
|
|
Keywords: |
Abstract :
|
|
Der Einfluss der Oberfläche auf das Funktionsverhalten von Presspassungen
|
|
H.J. Burger / H. Von Weingraber
|
|
STC S, 26/1/1977, P.357
|
|
Keywords: |
Abstract :
|
|
On the surface durability of machine tool gears
|
|
R. Krishnamurthy / V.C. Venkatesh
|
|
STC S, 26/1/1977, P.361
|
|
Keywords: |
Abstract :
|
|
Sheet surface properties and identification of the contact pairs surface effect on the stamping property by unconventional physical methods
|
|
J. Buza, J. Buda (1)
|
|
STC S, 26/1/1977, P.367
|
|
Keywords: |
Abstract :
|
|
Surface roughness measurements by photometric method
|
|
T. Karpinski, C. Lukianowicz / J. Kaczmarek
|
|
STC S, 26/1/1977, P.371
|
|
Keywords: |
Abstract :
|
|
A capacitance-based surface texture measuring system
|
|
J.N. Brecker (2), R.E. Fromson, L.Y. Shum / M.C. Shaw
|
|
STC S, 26/1/1977, P.375
|
|
Keywords: |
Abstract :
|
