CIRP ANNALS 1970
|
|
|
|
|
STC none |
|
Problems with an aerostatic bearing cutting force dynamometer
|
|
P. Alessio, M.G. Jona
|
|
STC none, 19/1/1970, P.15
|
|
Keywords: |
Abstract :
|
|
A preliminary investigation of the hydrostatic extrusion of polymers
|
|
J.M. Alexander, P.J.H. Wormell
|
|
STC none, 19/1/1970, P.21
|
|
Keywords: |
Abstract :
|
|
A preliminary investigation of the isostatic compaction and hydrostatic extrusion of iron powder
|
|
J.M. Alexander, L.B. Dove
|
|
STC none, 19/1/1970, P.29
|
|
Keywords: |
Abstract :
|
|
The billet augmented hydrostatic extrusion of copper
|
|
J.M. Alexander, S. Thiruvarudchelvan
|
|
STC none, 19/1/1970, P.39
|
|
Keywords: |
Abstract :
|
|
Rectangular hydrostatic bearings
|
|
R. Bassani
|
|
STC none, 19/1/1970, P.53
|
|
Keywords: |
Abstract :
|
|
Computer adaptive control of a machine tool
|
|
B.R. Beadle, J.G. Bollinger
|
|
STC none, 19/1/1970, P.61
|
|
Keywords: |
Abstract :
|
|
The contact stiffness of joints at low apparent interface pressures
|
|
M.P. Dolbey, R. Bell
|
|
STC none, 19/1/1970, P.67
|
|
Keywords: |
Abstract :
|
|
Development of an analytical model for investigating the performance of a needle valve
|
|
A. Bhattacharyya, S.K. De, A. Pal
|
|
STC none, 19/1/1970, P.81
|
|
Keywords: |
Abstract :
|
|
Rigidity analysis of re-circulating ball screw nut assembly with a semi-circular thread form
|
|
A. Bhattacharyya, A.B. Chatterjee, G.L. Manwani
|
|
STC none, 19/1/1970, P.87
|
|
Keywords: |
Abstract :
|
|
On a viscous damper for a two-component dynamometer
|
|
W.D.G. Bosma, A.C.H. Van der Wolf
|
|
STC none, 19/1/1970, P.95
|
|
Keywords: |
Abstract :
|
|
On-line dynamic testing of machine tools
|
|
S. Braun
|
|
STC none, 19/1/1970, P.99
|
|
Keywords: |
Abstract :
|
|
Local elastic deflections in grinding
|
|
R.H. Brown, K. Saito, M.C. Shaw
|
|
STC none, 19/1/1970, P.105
|
|
Keywords: |
Abstract :
|
|
Closer tolerances - economic sense
|
|
J.B. Bryan
|
|
STC none, 19/1/1970, P.115
|
|
Keywords: |
Abstract :
|
|
On the significance of equivalent chip thickness
|
|
C. Bus, N.A.L. Touwen, P.C. Veenstra, A.C.H. Van der Wolf
|
|
STC none, 19/1/1970, P.121
|
|
Keywords: |
Abstract :
|
|
Friction and its effects on linear positional hydraulic and electro-hydraulic servosystems
|
|
R. Chiappulini
|
|
STC none, 19/1/1970, P.125
|
|
Keywords: |
Abstract :
|
|
Component classification as an aid to the design of press tools
|
|
B. Fogg, G.A. Jamieson, A.W.J. Chisholm
|
|
STC none, 19/1/1970, P.141
|
|
Keywords: |
Abstract :
|
|
Thermal aspects of wear of diamond grain in grinding
|
|
N. Ikawa, T. Tanaka
|
|
STC none, 19/1/1970, P.153
|
|
Keywords: |
Abstract :
|
|
Management structure for the implementation of group technology
|
|
R. Connolly, A.J.P. Sabberwal
|
|
STC none, 19/1/1970, P.159
|
|
Keywords: |
Abstract :
|
|
The finite element method for machine tool structural analysis
|
|
A. Cowley, S. Hinduja
|
|
STC none, 19/1/1970, P.171
|
|
Keywords: |
Abstract :
|
|
Cutting forces, temperatures and surface characteristics for CIRP nickel-chrome steels
|
|
J.R. Crookall, T. Raine
|
|
STC none, 19/1/1970, P.183
|
|
Keywords: |
Abstract :
|
|
Strömungsumschlag und Verdichtungsstoss als Fehlerursachen bei der pneumatischen Längenmessung
|
|
R. Breitinger
|
|
STC none, 19/1/1970, P.191
|
|
Keywords: |
Abstract :
|
|
A note on the reduction ratio of tube sections in hot pilger mill rolling
|
|
G. Perotti, A. Zompi
|
|
STC none, 19/2/1970, P.209
|
|
Keywords: |
Abstract :
|
|
A new graphical solution of the machine tool stability equation
|
|
J. Lombard, J.F. Imbert, F. Mirski
|
|
STC none, 19/2/1970, P.213
|
|
Keywords: |
Abstract :
|
|
On the stress/strain curves of materials for hydrostatic cold extrusion
|
|
B. Lengyel, D.C. Stamelos
|
|
STC none, 19/2/1970, P.219
|
|
Keywords: |
Abstract :
|
|
Strain concentration due to heat generation in fast plastic deformation
|
|
H. Kudo, M. Tsubouchi
|
|
STC none, 19/2/1970, P.225
|
|
Keywords: |
Abstract :
|
|
Dynamic calibration of dynamometers
|
|
R. Komanduri, V.A. Stewart, R.H. Brown
|
|
STC none, 19/2/1970, P.231
|
|
Keywords: |
Abstract :
|
|
The correction for dynamic errors in machine tool dynamometers
|
|
W.A. Knight, M.M. Sadek
|
|
STC none, 19/2/1970, P.237
|
|
Keywords: |
Abstract :
|
|
Some mechanical and thermal aspects of twist drill performance
|
|
U. Koch, R. Levi
|
|
STC none, 19/2/1970, P.247
|
|
Keywords: |
Abstract :
|
|
An automatic instrument for fast and accurate measurement of line standard
|
|
J. Koning, P.H.J. Schellekens
|
|
STC none, 19/2/1970, P.255
|
|
Keywords: |
Abstract :
|
|
The accuracy of length measurement limited by unknown temperature
|
|
J. Koning
|
|
STC none, 19/2/1970, P.259
|
|
Keywords: |
Abstract :
|
|
Deformation characteristics and bonding process of aluminium fine wire in ultrasonic bonding
|
|
M. Kashiwabara, S. Hattori
|
|
STC none, 19/2/1970, P.285
|
|
Keywords: |
Abstract :
|
|
Der Einfluss der Stempelgeometrie auf die kritische Tiefziehkraft
|
|
J.A.G. Kals
|
|
STC none, 19/2/1970, P.291
|
|
Keywords: |
Abstract :
|
|
On the calculation of stability charts on the basis of the damping and the stiffness of the cutting process
|
|
H.J.J. Kals
|
|
STC none, 19/2/1970, P.297
|
|
Keywords: |
Abstract :
|
|
Scope and possibilities of geometrical adaptive control in turning
|
|
M.G. Jona
|
|
STC none, 19/2/1970, P.305
|
|
Keywords: |
Abstract :
|
|
Redundant deformation factors and maximum reduction in plain strain and axi-symmetric wire drawing - I. A theoretical investigation
|
|
W. Johnson, R. Sowerby, R.M. Caddell
|
|
STC none, 19/2/1970, P.311
|
|
Keywords: |
Abstract :
|
|
Tool wear by chatter caused by oxygen pomping
|
|
U. Johansson, B. Lindström
|
|
STC none, 19/2/1970, P.317
|
|
Keywords: |
Abstract :
|
|
On the mechanism of built-up edge formation in cutting
|
|
K. Iwata, J. Aihara, K. Okushima
|
|
STC none, 19/2/1970, P.323
|
|
Keywords: |
Abstract :
|
|
Electropolishing of GaAs with a rotating disc
|
|
I. Ida, S. Iiyama, S. Furumoto
|
|
STC none, 19/2/1970, P.331
|
|
Keywords: |
Abstract :
|
|
The damage caused by the built-up edge
|
|
H.J. Hovinga
|
|
STC none, 19/2/1970, P.341
|
|
Keywords: |
Abstract :
|
|
Residual stress after roller levelling
|
|
F. Hibino, A. Kunii
|
|
STC none, 19/2/1970, P.347
|
|
Keywords: |
Abstract :
|
|
Producing a mirror surface ground by ultrasonic-dressed wheels
|
|
M. Harada, A. Kobayashi
|
|
STC none, 19/2/1970, P.361
|
|
Keywords: |
Abstract :
|
|
Regulation in process of cutting parameters - II. Programmer positioning dimension system for the realization of an automatic turning cycle
|
|
F. Giusti
|
|
STC none, 19/2/1970, P.369
|
|
Keywords: |
Abstract :
|
|
Optimization of the machining process and overall system concepts
|
|
E.H. Frost-Smith
|
|
STC none, 19/2/1970, P.385
|
|
Keywords: |
Abstract :
|
|
Determination of temperature field on upper chip face
|
|
M.Y. Friedman, E. Lenz
|
|
STC none, 19/2/1970, P.395
|
|
Keywords: |
Abstract :
|
|
Face milling at - 180 C
|
|
A. De Filippi, R. Ippolito
|
|
STC none, 19/2/1970, P.399
|
|
Keywords: |
Abstract :
|
|
Design of hydrostatic slideways under impulsive loads
|
|
M. Favareto, G. Razelli
|
|
STC none, 19/2/1970, P.407
|
|
Keywords: |
Abstract :
|
|
Researches concerning optimum geometry of the finishing tools with nose radius
|
|
S. Enache
|
|
STC none, 19/2/1970, P.411
|
|
Keywords: |
Abstract :
|
|
Brightness in machining
|
|
V.C. Venkatesh, V. Radhakrishnan
|
|
STC none, 19/3/1970, P.433
|
|
Keywords: |
Abstract :
|
|
An attempt to improve the cutting performance through metallizing
|
|
K. Uehara, K. Dambara, Y. Kanda
|
|
STC none, 19/3/1970, P.439
|
|
Keywords: |
Abstract :
|
|
Dynamic force to chip thickness variation ratio in milling
|
|
J. Lombard, F. Mirski
|
|
STC none, 19/3/1970, P.445
|
|
Keywords: |
Abstract :
|
|
The role of oxygen in grinding
|
|
Y. Tanaka, T. Ueguchi
|
|
STC none, 19/3/1970, P.449
|
|
Keywords: |
Abstract :
|
|
Dynamic characteristics of machined joints loaded and excited normal to the joint face
|
|
R.H. Thornley, F. Koenigsberger
|
|
STC none, 19/3/1970, P.459
|
|
Keywords: |
Abstract :
|
|
On the evaluation of machinability, grindability and other workabilities based on specific cost of production
|
|
N. Taniguchi
|
|
STC none, 19/3/1970, P.471
|
|
Keywords: |
Abstract :
|
|
Abtragende Bearbeitung mit dem Plasmastrahl
|
|
G. Spur, R. Clausen, J. Herzke
|
|
STC none, 19/3/1970, P.477
|
|
Keywords: |
Abstract :
|
|
A comparison of an ultrasonic method to determine the chip-tool contact length with some other methods
|
|
C. Spaans
|
|
STC none, 19/3/1970, P.485
|
|
Keywords: |
Abstract :
|
|
Analysing flange drawing in non-circular cups using slip line fields
|
|
R. Sowerby, W. Johnson
|
|
STC none, 19/3/1970, P.491
|
|
Keywords: |
Abstract :
|
|
A planetary roller levelling machine
|
|
C. Soda, Y. Ando
|
|
STC none, 19/3/1970, P.501
|
|
Keywords: |
Abstract :
|
|
Review of results of the cooperative research program of the CIRP grinding group
|
|
R. Snoeys, A. Decneut
|
|
STC none, 19/3/1970, P.507
|
|
Keywords: |
Abstract :
|
|
Strain-rate and temperature effects during the fast upsetting of short circular cylinders of 0-55% plain carbon steel at elevated temperatures
|
|
R.A.C. Slater, S.Y. Aku, W. Johnson
|
|
STC none, 19/3/1970, P.513
|
|
Keywords: |
Abstract :
|
|
Examen critique des méthodes de tracé de la courbe vitesse-temps lors des essais de vie d'outil
|
|
J. Simonet, L. Czaplicki
|
|
STC none, 19/3/1970, P.529
|
|
Keywords: |
Abstract :
|
|
Fundamentals of wear
|
|
M.C. Shaw
|
|
STC none, 19/3/1970, P.533
|
|
Keywords: |
Abstract :
|
|
A relationship between chip type and shear strain
|
|
C.S. Sharma, W.B. Rice, R. Salmon
|
|
STC none, 19/3/1970, P.545
|
|
Keywords: |
Abstract :
|
|
An investigation of temperature distribution on tool flank surface
|
|
S. Rossetto, U. Koch
|
|
STC none, 19/3/1970, P.551
|
|
Keywords: |
Abstract :
|
|
A comparison in tabular form of stylus methods of surface profile assessment
|
|
R.E. Reason
|
|
STC none, 19/3/1970, P.559
|
|
Keywords: |
Abstract :
|
|
Numerische Steuerungen und Datenverarbeitungsalagen in der Fertigung
|
|
W. Rosenkranz, E. Baltin, W. Geyer
|
|
STC none, 19/3/1970, P.565
|
|
Keywords: |
Abstract :
|
|
Observations on Taylor
|
|
E.J. Pilafidis
|
|
STC none, 19/3/1970, P.571
|
|
Keywords: |
Abstract :
|
|
The influence of wear on the temperature distribution at the rake face
|
|
O.D. Prins
|
|
STC none, 19/3/1970, P.579
|
|
Keywords: |
Abstract :
|
|
The unbalance of electromotors and their influence on the surface geometry in surface grinding
|
|
J. Peters, P. Vanherck
|
|
STC none, 19/3/1970, P.585
|
|
Keywords: |
Abstract :
|
|
Calculation of deformation conditions in plasticity
|
|
N.A. Nilsson
|
|
STC none, 19/3/1970, P.591
|
|
Keywords: |
Abstract :
|
|
An interferometric scale and grid comparator
|
|
E.G. Loewen, R.H. Burns
|
|
STC none, 19/3/1970, P.597
|
|
Keywords: |
Abstract :
|
|
Optimization of manufacturing on multi-spindle machines
|
|
B. Bartalucci, R. Bedini, G.G. Lisini
|
|
STC none, 19/3/1970, P.603
|
|
Keywords: |
Abstract :
|
|
L'influence mutuelle des paramètres mécaniques sur la stabilité d'un servomécanisme
|
|
A. Appoggetti, M. Manieri, A. Musso
|
|
STC none, 19/4/1970, P.609
|
|
Keywords: |
Abstract :
|
|
The measurement of the grinding wheel wear with the Quantimet Image Analysing Computer
|
|
A.M. Besuyen
|
|
STC none, 19/4/1970, P.619
|
|
Keywords: |
Abstract :
|
|
Die Beeinflussung der Schnittflächenrauheit durch die Mikrogestalt der Werkzeugschneide
|
|
F. Betz
|
|
STC none, 19/4/1970, P.625
|
|
Keywords: |
Abstract :
|
|
Choix rapide des nuances de carbures
|
|
H. Chapuis, M. Bassiere
|
|
STC none, 19/4/1970, P.633
|
|
Keywords: |
Abstract :
|
|
Redundant deformation in plane strain drawing -II. An experimental investigation
|
|
R.M. Caddell, R. Sowerby
|
|
STC none, 19/4/1970, P.639
|
|
Keywords: |
Abstract :
|
|
Methods for sensing the rate of tool wear
|
|
L.V. Colwell
|
|
STC none, 19/4/1970, P.647
|
|
Keywords: |
Abstract :
|
|
On geometrical similarity in compound circular cylinders and spherical shells under internal pressure
|
|
W. Johnson, M.C. De Malherbe, R. Venter
|
|
STC none, 19/4/1970, P.653
|
|
Keywords: |
Abstract :
|
|
On the basic relationships between grinding parameters
|
|
R.P. Lindsay, R.S. Hahn
|
|
STC none, 19/4/1970, P.657
|
|
Keywords: |
Abstract :
|
|
Ein kontinuierlich arbeitendes Streubildmessverfahren für Schleifbänder
|
|
H.-R. Meyer
|
|
STC none, 19/4/1970, P.667
|
|
Keywords: |
Abstract :
|
|
The influence of surface topography on the friction and lubrication of elastomers
|
|
D.F. Moore
|
|
STC none, 19/4/1970, P.673
|
|
Keywords: |
Abstract :
|
|
Gesetzmässigkeiten im Aufbau der Schleifwerkzeuge
|
|
M. Moser
|
|
STC none, 19/4/1970, P.679
|
|
Keywords: |
Abstract :
|
|
About the standardization and spectral measurement of surface waviness
|
|
J. Nara
|
|
STC none, 19/4/1970, P.687
|
|
Keywords: |
Abstract :
|
|
Ein Tastschnittverfähren zur Ermittlung räumlicher Oberflächenmessgrössen
|
|
G. Nelle
|
|
STC none, 19/4/1970, P.695
|
|
Keywords: |
Abstract :
|
|
Elektrochemisches Aussen-Kurzhubhonen mit Diamanthonleisten
|
|
G. Pahlitzsch, E. Dreesmann
|
|
STC none, 19/4/1970, P.705
|
|
Keywords: |
Abstract :
|
|
Study on automatic programming for numerical control. Automatic determination of cutting conditions in longitudunal rough turning
|
|
H. Takeyama, T. Honda, H. Sekiguchi, K. Takada, K. Inoue
|
|
STC none, 19/4/1970, P.713
|
|
Keywords: |
Abstract :
|
|
Curzprüfverfahren für Schnittkraft-Kennwerte
|
|
H. Victor, H. Zeile
|
|
STC none, 19/4/1970, P.725
|
|
Keywords: |
Abstract :
|
|
Zweifacher Biegevorgang beim Walzrichten von Metallbändern
|
|
H. -D. Witte
|
|
STC none, 19/4/1970, P.729
|
|
Keywords: |
Abstract :
|
|
Entwicklung eines viskohydraulischen Vorschubantriebs
|
|
G. Stute, H. Arafa
|
|
STC none, 19/4/1970, P.735
|
|
Keywords: |
Abstract :
|
|
Some experiments in dynamic plasticity at elevated temperatures
|
|
S.K. Samanta
|
|
STC none, 19/4/1970, P.755
|
|
Keywords: |
Abstract :
|
|
Development and application of face milling cutters using throwaway carbide tips
|
|
R. Tilsley
|
|
STC none, 19/4/1970, P.767
|
|
Keywords: |
Abstract :
|
|
Some observations on the contact resistance hot machining process
|
|
J. Ellis, G. Barrow
|
|
STC none, 19/4/1970, P.775
|
|
Keywords: |
Abstract :
|
|
Selection of optimum feed and speed in finish turning
|
|
F.O. Rasch, A. Rolstadas
|
|
STC none, 19/4/1970, P.787
|
|
Keywords: |
Abstract :
|
|
Report on cooperative work performances and utilisation of electro-magnetic exciters
|
|
F. Mirski, J. Lombard
|
|
STC none, 19/4/1970, P.813
|
|
Keywords: |
Abstract :
|
