THE INTERNATIONAL ACADEMY FOR PRODUCTION ENGINEERING

Log in

CIRP ANNALS 1975

GO TO STC:

 STC C 

New tool materials - wear mechanism and application
W. Koenig (1), K. Essel  
STC C,  24/1/1975,  P.1
Keywords:
Abstract :
The significance of the productivity function in machining economics
G.L. Ravignani (1)  
STC C,  24/1/1975,  P.7
Keywords:
Abstract :
Nature of brittle failure of cutting tool
T.N. Loladze (1)  
STC C,  24/1/1975,  P.13
Keywords:
Abstract :
A repetitive test for assessing tool-life distributions
J.G. Wager, G. Lorenz (1)  
STC C,  24/1/1975,  P.17
Keywords:
Abstract :
Dynamics of cutting forces in end milling
J. Tlusty (1), P. MacNeil  
STC C,  24/1/1975,  P.21
Keywords:
Abstract :
A study on sequential quality improvement in hole-making processes
C.H. Kahng, I. Ham (1)  
STC C,  24/1/1975,  P.27
Keywords:
Abstract :
Précision des trous réalisés en perçage en fonction de la géométrie d'affutage du foret
J.C. Tanguy, R. Geslot (2)  
STC C,  24/1/1975,  P.33
Keywords:
Abstract :
A study of the periodic deformation produced on machined surfaces
D. Bizeul, F. Le Maitre (1)  
STC C,  24/1/1975,  P.39
Keywords:
Abstract :
Location repeatability of indexable triangular inserts
A. Ber (1), M.Y. Friedmann (1)  
STC C,  24/1/1975,  P.43
Keywords:
Abstract :
The mechanism of the formation of built-up edge in cutting of 60Cu-40Zn brass
R. Makino (2), K. Kishi (2), K. Hoshi (2)   / K. Okushima
STC C,  24/1/1975,  P.47
Keywords:
Abstract :
On the motion of drill tip and the accuracy of hole in gun drilling
Y. Hasegawam, O. Horiuchi   / N. Takenaka
STC C,  24/1/1975,  P.53
Keywords:
Abstract :
Characteristics of tool wear based on the volume of flank and crater wear - a proposal on the measurement of tool life
K. Uehara (2)   / H. Takeyama
STC C,  24/1/1975,  P.59
Keywords:
Abstract :
The significance of structural parameters in failure of cemented carbides
A.C.H. Van der Wolf (1)  
STC C,  24/1/1975,  P.65
Keywords:
Abstract :
Tool-life and force relationships in milling using dental burs
B. Lindström   / B. Colding
STC C,  24/1/1975,  P.69
Keywords:
Abstract :
Cutting temperature versus tool wear
L.V. Colwell (1)  
STC C,  24/1/1975,  P.73
Keywords:
Abstract :
Cutting forces and surface roughness in broaching
E. Kuljanic (2)  
STC C,  24/1/1975,  P.77
Keywords:
Abstract :
Formverbesserung beim elektrochemischen Honen durch Variation der Elektrolytströmung
H.R. Victor (1), G. Krawitz (2)  
STC C,  24/1/1975,  P.101
Keywords:
Abstract :

 STC E 

Correlation between electro-discharge machining data and machining settings
R. Snoeys (1), H. Cornelissen  
STC E,  24/1/1975,  P.83
Keywords:
Abstract :
Fotometrische Bestimmung der räumlichen und zeitlichen Strukturveränderungen der Entladung bei der funkenerosiven Metallbearbeitung
J. Zimanyi   / J. Stanek
STC E,  24/1/1975,  P.89
Keywords:
Abstract :
Material removal and energy distribution in electrical discharge machining
W. Koenig (1), R. Wertheim, Y. Zvirin, M. Toren  
STC E,  24/1/1975,  P.95
Keywords:
Abstract :
Herstellen von Erodierelektroden durch Galvanoformung
H.J. Warnecke (1), G.G. Weiler  
STC E,  24/1/1975,  P.105
Keywords:
Abstract :
Cracking behaviour of sintered carbides during EDM
E. Lenz (1), E. Katz, W. Koenig (1), R. Wertheim  
STC E,  24/1/1975,  P.109
Keywords:
Abstract :
Effect of the fluiddynamic conditions on the gap resistivity in ECM
R. Ippolito (2)   / G.F. Micheletti
STC E,  24/1/1975,  P.115
Keywords:
Abstract :
Cutting of metals with a 300 W CO2 laser
A. Kobayashi (1), S. Shimakawa, Y. Nagano  
STC E,  24/1/1975,  P.121
Keywords:
Abstract :
Ion sputter-machining of iron and steel
N. Taniguchi (1), S. Yoshimoto, I. Miyamoto  
STC E,  24/1/1975,  P.125
Keywords:
Abstract :
Etude thermocinétique de l'électro-érosion. Recherche des paramètres adimensionnels
C. Marty   / R. Weill
STC E,  24/1/1975,  P.131
Keywords:
Abstract :
Amélioration de la précision d'usinage en usinage électrochimique par utilisation de courants pulsés
C. Schepacz   / R. Weill
STC E,  24/1/1975,  P.135
Keywords:
Abstract :
Zur elektrochemischen Bearbeitung von Hartmetall in Schleifmittel-Elektrolytsuspension
K. Iliev   / G.N. Mescheriakov
STC E,  24/1/1975,  P.141
Keywords:
Abstract :
Electrocontact pulse machining of needle files
G.N. Mescheriakov (1), B.I. Ivashin, G.I. Samohin, N.I. Kovalchuk, V.A. Burjan, G.A. Baranochnikov  
STC E,  24/1/1975,  P.145
Keywords:
Abstract :

 STC F 

A probabilistic evaluation of the relative behaviour of tungsten carbide components in structural applications
R. Venter, M. Mullins, M.C. De Malherbe (1)  
STC F,  24/1/1975,  P.147
Keywords:
Abstract :
Measurement of strip temperature in the roll gap during cold rolling
J. Jeswiet, W.B. Rice (1)  
STC F,  24/1/1975,  P.153
Keywords:
Abstract :
Forming viscous solids
J.A. Forster, R.A. Sabir, J.L. Duncan   / J. Tlusty
STC F,  24/1/1975,  P.157
Keywords:
Abstract :
Influence of some parameters on die filling in closed-die forging
K.T. Chang, I.J. Choi   / I. Ham
STC F,  24/1/1975,  P.163
Keywords:
Abstract :
The elastic deformation of square extrusion dies due to load and temperature
K. Gieselberg   / K. Lange
STC F,  24/1/1975,  P.167
Keywords:
Abstract :
Design, development and testing of a high speed press employing an electromagnetic induction tubular motor
P. Sadigh, B. Lengyel   / J.M. Alexander
STC F,  24/1/1975,  P.173
Keywords:
Abstract :
Externally pressurised lubrication in the drawing of thin walled cylindrical components
B. Fogg (2), K. Dafila  
STC F,  24/1/1975,  P.179
Keywords:
Abstract :
Development of a simulation testing machine of friction and wear characteristics of lubricant and tool for extrusion and forging
H. Kudo (1), M. Tsubouchi  
STC F,  24/1/1975,  P.185
Keywords:
Abstract :
Experimental investigation of the cold pilgering of copper tubes
H. Yoshida, T. Matsui, T. Otani, K. Mandai   / H. Kudo
STC F,  24/1/1975,  P.191
Keywords:
Abstract :
Consolidation of cast iron machining swarf by sintering
T. Nakagawa (2), C.S. Sharma, T. Amano, M. Asano  
STC F,  24/1/1975,  P.197
Keywords:
Abstract :
On the life time of die-sets
A.G.M. Buiteman, F. Doorshot, P.C. Veenstra (1)  
STC F,  24/1/1975,  P.203
Keywords:
Abstract :
Der Einfluss der Adiabaten-Erwärmung und Entfestigung auf das Formänderungsvermögen bei der Warmumformung
P. Huml   / P.O. Strandell
STC F,  24/1/1975,  P.207
Keywords:
Abstract :
Instabilités d'écoulement sur une surface libre et critère de fracture
P. Baqué, B. Roncin   / R. Weill
STC F,  24/1/1975,  P.213
Keywords:
Abstract :
Effets dynamiques en frappe à chaud
P. Baqué, P. Fernier   / P.O. Strandell
STC F,  24/1/1975,  P.219
Keywords:
Abstract :

 STC G 

Analysis of plunge grinding operations
M. Maris (2), R. Snoeys (1), J. Peters (1)  
STC G,  24/1/1975,  P.225
Keywords:
Abstract :
Properties of cutting edges related to chip formation in grinding
W. Koenig (1), W. Lortz  
STC G,  24/1/1975,  P.231
Keywords:
Abstract :
The microtopography of the grinding wheel surface with SEM
Y. Matsuno, H. Yamada, M. Harada, A. Kobayashi (1)  
STC G,  24/1/1975,  P.237
Keywords:
Abstract :
Analytical description of accumulation phenomenon in grinding
K. Okamura, T. Nakajima, Y. Uno   / N. Takenaka
STC G,  24/1/1975,  P.243
Keywords:
Abstract :
Die elastische Verformung an der Kontaktzone bei der Umfangsschleifscheibe
Y. Tanaka (1), A. Yano, M. Higuchi  
STC G,  24/1/1975,  P.249
Keywords:
Abstract :
Lift error on grinding cam profile
Y. Kawasaki, S. Yamamoto, Y. Yamamoto, K. Ito, H. Nagano, S. Inanobe, Y. Watanabe   / N. Taniguchi
STC G,  24/1/1975,  P.253
Keywords:
Abstract :
The real contactlength in cylindrical plunge grinding
J. Verkerk   / A.J. Pekelharing
STC G,  24/1/1975,  P.259
Keywords:
Abstract :
Synthetic diamond
K.H. O'Donovan   / G.F. Micheletti
STC G,  24/1/1975,  P.265
Keywords:
Abstract :
A model for determination of number of active grinding edges in various grinding processes
L. Tigerstroem   / O. Svahn
STC G,  24/1/1975,  P.271
Keywords:
Abstract :
Einsatz von kubischem Bornitrid (CBN; General Electric Co. 'Borazon' (BZN) beim Flachschleifen von Schnellarbeitsstahl X 130WV 124 (früher EV4)
G. Pahlitzsch (1), K. Karatzoglou  
STC G,  24/1/1975,  P.277
Keywords:
Abstract :

 STC M 

Konstruieren von komplexen Werkzeugen mit Rechnerunterstützung
H.K. Toenshoff   / G. Spur
STC M,  24/1/1975,  P.281
Keywords:
Abstract :
Flexibles Fertigungssystem - Aufbau einer Modellanlage
G. Stute (1), A. Storr, D. Binder, R. Wilhelm  
STC M,  24/1/1975,  P.285
Keywords:
Abstract :
Comparative assessment of harmonic, random, swept sine and shock excitation methods for the identification of machine tool structures with rotating spindles
H. Van Brussel   / J. Peters
STC M,  24/1/1975,  P.291
Keywords:
Abstract :
Fundamentals of mechanical reliability and its application to computer aided machine design
H. Yoshikawa   / N. Taniguchi
STC M,  24/1/1975,  P.297
Keywords:
Abstract :
Anwendung der Methode Finiter Elemente bei der Analyse des Dynamischen Verhaltens gedämpfter Werkzeugmaschinenstrukturen
M. Weck (1), W. Miessen, R. Finke, W. Mueller  
STC M,  24/1/1975,  P.303
Keywords:
Abstract :
Development of method to predict and prevent chattering in metal cutting
T. Sata (1), T. Inamura  
STC M,  24/1/1975,  P.309
Keywords:
Abstract :
Signal processing for the determination of chatter threshold
S. Braun (2)  
STC M,  24/1/1975,  P.315
Keywords:
Abstract :
The application of machine tool research
A.E. De Barr   / F. Koenigsberger
STC M,  24/1/1975,  P.321
Keywords:
Abstract :
Compensation of thermal displacement by coordinate system correction
K. Okushima (1), Y. Kakino, A. Higashimoto  
STC M,  24/1/1975,  P.327
Keywords:
Abstract :
Entwicklung aerostatischer Lager nach wirtschaftlichen Gesichtspunkten
H.R. Victor (1), J. Schmidt (2)  
STC M,  24/1/1975,  P.333
Keywords:
Abstract :
Gas bearings - computing and behaviour
J. Lombard (1), P.J. Duchaine (2), J.M. Rottiers  
STC M,  24/1/1975,  P.337
Keywords:
Abstract :
Investigations on externally pressurised air lubricated journal bearings
V.C. Venkatesh (1), V. Kamala  
STC M,  24/1/1975,  P.343
Keywords:
Abstract :
Sensoren zur Erfassung von Prozesskenngrössen bei der Drehbearbeitung
G. Spur (1), F. Leonards  
STC M,  24/1/1975,  P.349
Keywords:
Abstract :
Piezoelectric-supported thrust bearing for the tool slide of a diamond turning machine
J. Bryan (1), H. Brooks, R. Clouser  
STC M,  24/1/1975,  P.355
Keywords:
Abstract :
On the design of die-sets
J.A.W. Hijink, A.C.H. Van der Wolf (1)  
STC M,  24/1/1975,  P.357
Keywords:
Abstract :
Geometrische Fehler in Werkzeugmaschinenstrukturen
R. Schultschik (2)  
STC M,  24/1/1975,  P.361
Keywords:
Abstract :
Study of adoptive system for compensation of machine-tool structure deflection by automatically controlled reversive deformation
G.N. Mescheriakov (1), A.M. Vozny  
STC M,  24/1/1975,  P.367
Keywords:
Abstract :

 STC Me 

Continuous Hardness testing
T. Stoeferle (1), P.H. Theimert  
STC Me,  24/1/1975,  P.371
Keywords:
Abstract :
Measuring of gears with a numeric controlled 3-axis measuring machine
M. Weck (1), P. Bagh, R. Holler  
STC Me,  24/1/1975,  P.375
Keywords:
Abstract :
A new practical method for holographic measurement of deformations
N. Abramson   / B. Colding
STC Me,  24/1/1975,  P.379
Keywords:
Abstract :
Messsystem für die adaptive Reglung der Formabweichung vom kreis beim Aussenrund-ein-stechschleifen
H. Trumpold (1), R. Mack  
STC Me,  24/1/1975,  P.383
Keywords:
Abstract :
Entwicklung und Einsatz optischer Bildwandlersysteme bei Mess - und Prüfaufgaben der Feinwerktechnik
D. Mangelsdorf   / W. Rosenkranz
STC Me,  24/1/1975,  P.387
Keywords:
Abstract :

 STC O 

Automatic handling of small parts
G. Boothroyd (2)  
STC O,  24/1/1975,  P.393
Keywords:
Abstract :
A review of developments in out-of-phase (Elliptical-Throw) vibratory conveying
A.H. Redford   / A.W.J. Chisholm
STC O,  24/1/1975,  P.399
Keywords:
Abstract :
Adaptive control for face-milling operations with strategies for avoiding chatter-vibrations and for automatic cut distribution
M. Weck (1), E. Verhaag, M. Gather  
STC O,  24/1/1975,  P.405
Keywords:
Abstract :
Integration of adaptive control constraint (ACC) into a CNC
G. Stute (1), N. Kapajiotidis (2)  
STC O,  24/1/1975,  P.411
Keywords:
Abstract :
The influence of constraints on cutting conditions optimization
A. De Filippi (2), R. Ippolito (2)   / G.F. Micheletti
STC O,  24/1/1975,  P.417
Keywords:
Abstract :
Some practical aspects of computer-aided programming via time-sharing network
J. Koloc (1)  
STC O,  24/1/1975,  P.423
Keywords:
Abstract :
The influencing factors in optimizing press tool die layouts and a solution using computer aids
B. Fogg (2), G.A. Jamieson  
STC O,  24/1/1975,  P.429
Keywords:
Abstract :
Praktische Erfahrungen und Beispiele über die Notwendigkeit technischer Programmsysteme - CAD und CAM Verfahren -
W. Rosenkranz (1), R. Schwetz  
STC O,  24/1/1975,  P.435
Keywords:
Abstract :
Machining productivity in different industrial environments
R. Van Hasselt (1), S.H. Wirjomartono, E.J. De Bruijn  
STC O,  24/1/1975,  P.441
Keywords:
Abstract :
A cost model and a performance index for a manufacturing system
B. Colding (1)  
STC O,  24/1/1975,  P.447
Keywords:
Abstract :
An approach to cost and power optimization in machining
I.H. Sélim, A. Moisan (2), G.L. Ravignani (1)  
STC O,  24/1/1975,  P.453
Keywords:
Abstract :
Adjustment operation in machine production
T. Sata (1), S. Takata  
STC O,  24/1/1975,  P.459
Keywords:
Abstract :
Analysis of optimum loading sequence of parts and optimum machining conditions for flow-type multistage machining system
K. Iwata (2), Y. Murotsu, F. Oba, Y. Kawabe  
STC O,  24/1/1975,  P.465
Keywords:
Abstract :
The application of numerical control techniques to production of gears
D. French, A. Ferreira   / W.B. Rice
STC O,  24/1/1975,  P.471
Keywords:
Abstract :
Mathematical evaluation and graphical presentation of Delphi-type forecast
M. Szafarczyk (2)   / M.E. Merchant
STC O,  24/1/1975,  P.475
Keywords:
Abstract :
Schnittwertermittlung bei simultaner Mehrwerkzeugbearbeitung
W. Eversheim, D. Pfau   / H. Opitz
STC O,  24/1/1975,  P.479
Keywords:
Abstract :

 STC S 

Analyse polynominale des profils de surfaces. Premier ensemble de résultats.
A. Leroy (1)  
STC S,  24/1/1975,  P.485
Keywords:
Abstract :
Theoretical determination of the reflection curves and introduction of a new method for measuring surface gloss
P.M. Lonardo   / G.F. Micheletti
STC S,  24/1/1975,  P.491
Keywords:
Abstract :
Variation in surface stress due to metal removal
P.S. Prevey, M. Field (1)  
STC S,  24/1/1975,  P.497
Keywords:
Abstract :
Untersuchungen über den Zustand geschliffener Oberflächen
H.K. Toenshoff   / G. Spur
STC S,  24/1/1975,  P.503
Keywords:
Abstract :
Correlation between transition load in boundary lubrication and radius of curvature of surface asperity
J.M. Georges, B. Lamy   / R. Weill
STC S,  24/1/1975,  P.509
Keywords:
Abstract :
The effect of surface finish on the wear of sliding surfaces
E.P. Abrahamson, S. Jahanmir, N.P. Suh (2)  
STC S,  24/1/1975,  P.513
Keywords:
Abstract :