THE INTERNATIONAL ACADEMY FOR PRODUCTION ENGINEERING

Log in

CIRP ANNALS 1984

GO TO STC:

 STC C 

Optimum tool replacement policies with running-in of the cutting edge
S. Noto la Diega, A. Passannanti   / N. Alberti
STC C,  33/1/1984,  P.1
Keywords:
Abstract :
Predictive models for drilling thrust and torque
E.J.A. Armarego (1), J.D. Wright  
STC C,  33/1/1984,  P.5
Keywords:
Abstract :
Strategies to control variations in machinability in mixed manufacturing
A. Kinnander, I. Svenningsson   / B. Colding
STC C,  33/1/1984,  P.11
Keywords:
Abstract :
Computer graphics simulation of metal cutting
W.R. de Vries (2), M.S. Evans   / L.V. Colwell
STC C,  33/1/1984,  P.15
Keywords:
Abstract :
A comparative analysis of three machining processes : broaching, tapping ans slotting
P. Gilormini, E. Felder, L. Tronchet, F. Leroy   / F. Le Maître
STC C,  33/1/1984,  P.19
Keywords:
Abstract :
Discrete description of multi-edge cutter conditions
A. Cumani, A. Villa, R. Levi (1)  
STC C,  33/1/1984,  P.23
Keywords:
Abstract :
Integrated end milling optimization development
V.A. Ostafiev (2), A.V. Globa, L.S. Globa   / T.N. Loladze
STC C,  33/1/1984,  P.29
Keywords:
Abstract :
Investigations into the clearance geometry of end mills
S. Kaldor, P.H.H. Trendler, T. Hodgson (2)   / G.F. Micheletti
STC C,  33/1/1984,  P.33
Keywords:
Abstract :
Machining of grinding wheel with carbide cutting tools
T. Matsuo (2), K. Tsukamoto   / K. Nakayama
STC C,  33/1/1984,  P.39
Keywords:
Abstract :
An investigation of the influence of feed and rake angle on the ratio of feed force to cutting force when machining with negative rake angle tools
E.M. Kopalinsky, P.L.B. Oxley (1)  
STC C,  33/1/1984,  P.43
Keywords:
Abstract :
The exit failure of cemented carbide face milling cutters. Part 1. Fundamentals and phenomenae
A.J. Pekelharing (1)  
STC C,  33/1/1984,  P.47
Keywords:
Abstract :
The exit failure of cemented carbide face milling cutters. Part 2.Testing of commercial cutters
C.A. Van Luttervelt (2), H. Willemse   / A. Pekelharing
STC C,  33/1/1984,  P.51
Keywords:
Abstract :
Analysis of the life of controlled contact tools via flank contact temperature estimation
P.K. Venuvinod, W.S. Lau, C. Rubenstein (1)  
STC C,  33/1/1984,  P.55
Keywords:
Abstract :
Cutting force measurement of a rotating tool by means of optical data transmission
Y. Ikezaki, Y. Takeuchi, M. Sakamoto   / T. Sata
STC C,  33/1/1984,  P.61
Keywords:
Abstract :
Thermal shock as a carbide grade development tool
C.W. Merten, B.F. Von Turkovich (1)  
STC C,  33/1/1984,  P.65
Keywords:
Abstract :
Identification of chip formation mechanism through acoustic emission measurements
K. Uehara (1), Y. Kanda  
STC C,  33/1/1984,  P.71
Keywords:
Abstract :
On the nature of micro-chipping of HSS saw teeth during power back sawing
H. Chandrasekaran, S. Svensson, R. Sandstrom   / V.C. Venkatesh
STC C,  33/1/1984,  P.75
Keywords:
Abstract :
Experimental research of the chip flow direction and its application to the chip control
C.Y. Jiang, Y.Z. Zhang (1), Z.J. Chi  
STC C,  33/1/1984,  P.81
Keywords:
Abstract :
Turning on machinable glass ceramics with an ultrasonically vibrated tool
H. Weber (1), J. Herberger, R. Pilz  
STC C,  33/1/1984,  P.85
Keywords:
Abstract :

 STC E 

Study on wire-EDM : in-process measurement of mechanical behaviour
N. Kinoshita (1), M. Fukui, Y. Kimura  
STC E,  33/1/1984,  P.89
Keywords:
Abstract :
Comparison of various approaches to model the thermal load on the EDM-wire electrode
M. Jennes, W. Dekeyser, R. Snoeys (1)  
STC E,  33/1/1984,  P.93
Keywords:
Abstract :
Electrochemical hole making
G. Chryssolouris, M. Wollowitz   / N.P. Suh
STC E,  33/1/1984,  P.99
Keywords:
Abstract :
Low-energy high current ion source for ion milling equipment
T. Masuzawa (2), I. Tsuchiya   / N. Kinoshita
STC E,  33/1/1984,  P.105
Keywords:
Abstract :
Parametric studies on abrasive jet machining
V.C. Venkatesh (1)  
STC E,  33/1/1984,  P.109
Keywords:
Abstract :
Integration of toolmaking into CAD/CAM systems
B. Schumacher   / E. Matthias
STC E,  33/1/1984,  P.113
Keywords:
Abstract :

 STC F 

Computer-assisted sequence design of the ring saddle cogging process
P. Bariani, A. Fanelli   / F. Jovane
STC F,  33/1/1984,  P.117
Keywords:
Abstract :
Use of electronic geometry transfer and FEM simulation in the design of hot forming dies for a gear blank
J.A. Ficke, S.I. Oh, T. Altan (1)  
STC F,  33/1/1984,  P.123
Keywords:
Abstract :
Computer aided design of 'multi-holed' streamlined extrusion dies
J.S. Gunasekera (2), H.J. Gegel, S.M. Doraivelu, J.C. Malas, J.C. Graham   / T. Altan
STC F,  33/1/1984,  P.129
Keywords:
Abstract :
Computer aided roll bending of thin sheet
E. Von Finckenstein (1), G. Ludowig  
STC F,  33/1/1984,  P.133
Keywords:
Abstract :
Closed-loop control of a roll straightening process
D.E. Hardt, M. Hale   / N.H. Cook
STC F,  33/1/1984,  P.137
Keywords:
Abstract :
Computer-aided shaping of interstages at die-forging. Conditions for laying out forging tools by means of CAD systems
E. Doege (1), H. Mathieu  
STC F,  33/1/1984,  P.141
Keywords:
Abstract :
Utilization of flow stress in metal forming calculations
P. Huml (2)   / P.O. Strandell
STC F,  33/1/1984,  P.147
Keywords:
Abstract :
An investigation into the elimination of the effects of billet/platen friction forces in compression testing
J. Mischke, F.W. Travis (2)   / J.M. Alexander
STC F,  33/1/1984,  P.151
Keywords:
Abstract :
New upsetting and tensile testing procedures for metals in warm or hot forging conditions
J.C. Gelin, J. Oudin, Y. Ravalard, C. Louise   / A. Moisan
STC F,  33/1/1984,  P.155
Keywords:
Abstract :
Elasto-mechanical failure criterion and its application to sheet forming
P. Hora, J. Reissner (2)   / G. Gerber
STC F,  33/1/1984,  P.161
Keywords:
Abstract :
A method of constructing slip line fields for plane strain compression
L.E. Farmer (2)   / P.L.B. Oxley
STC F,  33/1/1984,  P.167
Keywords:
Abstract :
Computer aided measurement of grid network deformation, for the determination of forming limit diagrams
R. Arrieux, J.M. Chalons, C. Bedrin (2), M. Boivin   / F. Le Maitre
STC F,  33/1/1984,  P.171
Keywords:
Abstract :
Edgewise bending of flat bar by new 'bend-rolling' process
Y. Tozawa (1), T. Ishikawa, Y. Mihara  
STC F,  33/1/1984,  P.175
Keywords:
Abstract :
Investigation of tool wear in bulk metal forming by model experiments
K. Lange (1), M. Weiergraber  
STC F,  33/1/1984,  P.179
Keywords:
Abstract :

 STC G 

Evaluation of superhard abrasive grains by overcut fly-milling test
T. Matsuo (2), E. Oshima   / T. Tsuwa
STC G,  33/1/1984,  P.185
Keywords:
Abstract :
On the universal process parameters governing the mutual machining of workpiece and wheel applied to the creep-feed grinding process
R.S. Hahn (1)  
STC G,  33/1/1984,  P.189
Keywords:
Abstract :
The effect of contact time on forces, wheelwear rate and G-ratio during internal and external grinding
R.P. Lindsay (1)  
STC G,  33/1/1984,  P.193
Keywords:
Abstract :
Current state of the art of workpiece roundness control in precision centerless grinding
C.P. Bhateja (2)   / R. Levi
STC G,  33/1/1984,  P.199
Keywords:
Abstract :
Dressing of conventional and CBN grinding wheels with diamond form rollers
E. Salje (1), H.G. Von Mackensen  
STC G,  33/1/1984,  P.205
Keywords:
Abstract :
Grinding of steels with cubic boron nitride (CBN)
E. Pecherer, S. Malkin (1)  
STC G,  33/1/1984,  P.211
Keywords:
Abstract :
Development of high-efficient fine finishing process using magnetic fluid
Y. Tani, K. Kawata   / K. Nakayama
STC G,  33/1/1984,  P.217
Keywords:
Abstract :
Surface melting in grinding opeartions ?
M.C. Shaw (1)  
STC G,  33/1/1984,  P.221
Keywords:
Abstract :

 STC M 

Nectar - A graphical technique to represent the component produced from the cutter path of a numerically controlled milling machine
P.F. McGoldrick, Z.Y. Lin, J.L. Green, R.J. Barson   / A.E. de Barr
STC M,  33/1/1984,  P.225
Keywords:
Abstract :
A flexible tool wear sensor for NC lathes
F. Giusti (1), M. Santochi (2), G. Tantussi  
STC M,  33/1/1984,  P.229
Keywords:
Abstract :
Effect of shear stiffness of fixed joints on thermal deformation of machine tools
L. Kops (1), D.M. Abrams  
STC M,  33/1/1984,  P.233
Keywords:
Abstract :
Torque and speed control of DC-servo-motors for robots
Y. Koren (2)   / S. Malkin
STC M,  33/1/1984,  P.239
Keywords:
Abstract :
Design of a high performance slide and drive system for a small precision machining research lathe
R.R. Donaldson, A.S. Maddux   / M.C. Shaw
STC M,  33/1/1984,  P.243
Keywords:
Abstract :
Improvement of dynamic rigidity of tool holder by applying high-damping material
H. Takeyama (1), N. Iijima, N. Nishiwaki, K. Komoto  
STC M,  33/1/1984,  P.249
Keywords:
Abstract :
Dynamic modeling of transverse drill bit vibrations
A. Galip Ulsoy, O. Tekinalp   / E. Lenz
STC M,  33/1/1984,  P.253
Keywords:
Abstract :
Growing mechanism of chatter vibrations in grinding processes
F. Hashimoto, A. Kanai, M. Miyashita (2)   / K. Okamura
STC M,  33/1/1984,  P.259
Keywords:
Abstract :
Dynamic testing and design of synchronous belt-drives
R. Chiappulini (1), L. Giannotti, A.E. Palagi, F. Paolucci  
STC M,  33/1/1984,  P.265
Keywords:
Abstract :
Machine tool vibration stability depending on adjustment of dominant stiffness axes
G.N. Meshcheriakov (1), L.P. Tuscharova, N.G. Meshcheriakov, A.N. Sivakov  
STC M,  33/1/1984,  P.271
Keywords:
Abstract :

 STC O 

coding system for parts feeding for robotic insertion
A.H. Redford, P.J. Killeen   / T.R. Crossley
STC O,  33/1/1984,  P.273
Keywords:
Abstract :
Automatic handling of parts for robot assembly
D. Zenger, p. Dewhurst (2)   / G. Boothroyd
STC O,  33/1/1984,  P.279
Keywords:
Abstract :
Development and performance of an aerospace flexible automated electronic component assembly cell
R.I. King, F.B. (Hugh) Allderdice   / R.L. Kegg
STC O,  33/1/1984,  P.283
Keywords:
Abstract :
Economics of general purpose assembly robots
G. Boothroyd (1)  
STC O,  33/1/1984,  P.287
Keywords:
Abstract :
Semi autonomous systems for automatic assembly
P.J. Drazan, S.H. Hopkins   / R. Tilsley
STC O,  33/1/1984,  P.291
Keywords:
Abstract :
Development of machine part data model consistent with designer's shape description in CAD/CAM system
T. Kojima, H. Sekiguchi, K. Inoue (2), T. Honda (2), K. Misue   / H. Takeyama
STC O,  33/1/1984,  P.295
Keywords:
Abstract :
TOJICAP - A system of computer aided process planning system for rotational parts
S. Zhang, W.D. Gao   / M.E. Merchant
STC O,  33/1/1984,  P.299
Keywords:
Abstract :
The use of expert systems in process-planning
B.J. Davies (1), I.L. Darbyshire  
STC O,  33/1/1984,  P.303
Keywords:
Abstract :
Use of multivariate statistical methods for application of group technology in design and process planning departments
W. Eversheim (1), F. Lock  
STC O,  33/1/1984,  P.307
Keywords:
Abstract :
Computer aids for the classification of pre-set tooling for numerical controlled machine tools
T.R. Crossley (1)  
STC O,  33/1/1984,  P.313
Keywords:
Abstract :
Investment in new technology and corporate strategy
B.B. Hundy   / J.M. Alexander
STC O,  33/1/1984,  P.314
Keywords:
Abstract :
A heuristic algorithm for optimum layout of metal stamping blank
A.Y.C. Nee (2)   / V.C. Venkatesh
STC O,  33/1/1984,  P.317
Keywords:
Abstract :
Progress in computer aided plant layout
H.J. Warnecke (1), W. Dangelmaier  
STC O,  33/1/1984,  P.321
Keywords:
Abstract :
Flexible manufacturing of wood pieces for furniture industries
M. Veron (1), P. Martin (2), R. Collet  
STC O,  33/1/1984,  P.327
Keywords:
Abstract :
On line scheduling for flexible manufacturing systems
G. Halevi, R. Weill (1)  
STC O,  33/1/1984,  P.331
Keywords:
Abstract :
Simulation for design and operation of manufacturing systems
K. Iwata (1), F. Oba, K. Yasuda  
STC O,  33/1/1984,  P.335
Keywords:
Abstract :
Optimizing the chances of survival
J. Hatvany   / F. Lettner
STC O,  33/1/1984,  P.345
Keywords:
Abstract :

 STC P(Q) 

CAD directed inspection and error analysis using surface patch databases
N. Duffie (2), J.G. Bollinger (1), R. Piper, M. Kroneberg  
STC P(Q),  33/1/1984,  P.347
Keywords:
Abstract :
Design of laminar flow restrictors for damping pneumatic vibration isolators
D.B. DeBra   / J. Bryan
STC P(Q),  33/1/1984,  P.351
Keywords:
Abstract :
CAD-directed inspection
T.H. Hopp   / R.J. Hocken
STC P(Q),  33/1/1984,  P.357
Keywords:
Abstract :
Development of a new automatic gear selecting machine for automobile transaxle manufacturing
Y. Kawasaki, M. Shinoda, S. Nojiri, A. Hayashi   / T. Hoshi
STC P(Q),  33/1/1984,  P.363
Keywords:
Abstract :
A fast response piezoelectric actuator for servo correction of systematic errors in precision machining
E. Kouno   / P.A. McKeown
STC P(Q),  33/1/1984,  P.369
Keywords:
Abstract :
The investigations on selected dynamical phenomena in the heads of multi-coordinate measuring devices
L. Nawara (1), M. Kowalski  
STC P(Q),  33/1/1984,  P.373
Keywords:
Abstract :
Measurement of diameter using charge coupled device (CCD)
K. Takesa, H. Sato (2), Y. Tani   / T. Sata
STC P(Q),  33/1/1984,  P.377
Keywords:
Abstract :
Measuring apparatus for setting errors of VTR magnetic heads
T. Komatsu, A. Ono, T. Hirakawa, N. Hoshina (2)   / N. Taniguchi
STC P(Q),  33/1/1984,  P.383
Keywords:
Abstract :
An optical measurement procedure for determination of the geometric accuracy of machine tools
M. Weck (1), M. Schmidt  
STC P(Q),  33/1/1984,  P.387
Keywords:
Abstract :

 STC S 

Residual stresses in machined surfaces. Elaboration of linear equation and design of annular test specimen
A. Bar-Shay, A. Ber (1)  
STC S,  33/1/1984,  P.393
Keywords:
Abstract :
On the geometrical and mechanical aspects of fretting-corrosion
A. Yousnadj, G. Maeder, A. Moisan (1)  
STC S,  33/1/1984,  P.399
Keywords:
Abstract :
An optical instrument for measuring the surface roughness in production control
R. Brodmann, T. Gast, G. Thurn   / A. Wirtz
STC S,  33/1/1984,  P.403
Keywords:
Abstract :
Optical measuring instrument for chatter marks
Y. Sakai, S. Ogata, S. Asai   / T. Hoshi
STC S,  33/1/1984,  P.407
Keywords:
Abstract :