THE INTERNATIONAL ACADEMY FOR PRODUCTION ENGINEERING

LOG IN FOR MEMBERS

CIRP ANNALS 1974

GO TO STC: A C Dn E F G M O P S Cross-STC

 STC C 
Viscoplastic parameters of copper and aluminium alloy in cutting condition
T. Vinh, A. Wafa   / R. Weill
STC C,  23/1/1974,  P.3
Keywords:
Abstract :
Contribution à l'étude des phénomènes périodiques dans les déformations dynamiques
F. Le Maitre, D. Bizeul  
STC C,  23/1/1974,  P.5
Keywords:
Abstract :
Some new observations of the deformation zone in orthogonal cutting of a mild steel
R.H. Brown, H.S. Luong  
STC C,  23/1/1974,  P.7
Keywords:
Abstract :
Influence du rayon de l'arête de l'outil sur la géométrie du copeau
J.C. Furrer   / P. Dinichert
STC C,  23/1/1974,  P.9
Keywords:
Abstract :
Recherches concernant l'influence de la géométrie de l'outil sur les conditions de coupe
S. Enache, D. Catrina, E. Strajescu  
STC C,  23/1/1974,  P.11
Keywords:
Abstract :
Relationship between the size of wear particles and the mechanism of tool wear in metal cutting
K. Uehara, S. Kumagai, H. Mitsui  
STC C,  23/1/1974,  P.13
Keywords:
Abstract :
Effects of stiffness on tool wear and new tool life equation
E. Kuljanic   / J. Peklenik
STC C,  23/1/1974,  P.15
Keywords:
Abstract :
Effect of transient vibration of cutting system on tool wear in interrupted cutting
M. Ikawa, Y. Inami  
STC C,  23/1/1974,  P.17
Keywords:
Abstract :
Effects of extreme pressure additives and water in cutting oil on tool wear
A. Ishibashi, A. Katsui   / K. Okushima
STC C,  23/1/1974,  P.19
Keywords:
Abstract :
Die Spanform als technische Grenze bei der manuellen und maschinellen Optimierung des Abspanverfahrens Drehen mit Wendeschneidplatten
H.J. Jacobs, A. Knoerrich   / R. Winkler
STC C,  23/1/1974,  P.21
Keywords:
Abstract :
Zyklische Festigkeit des Schneidwerkzeuges
N. Zorev, W. Ostafijen  
STC C,  23/1/1974,  P.23
Keywords:
Abstract :
Metal oxycarbides as cutting tool materials
W.W. Carson, C.L. Leung, N.P. Suh   / M.C. Shaw
STC C,  23/1/1974,  P.25
Keywords:
Abstract :
Rounding mechanism of reaming
M.Y. Friedman, I. Kitamura, S.M. Wu  
STC C,  23/1/1974,  P.27
Keywords:
Abstract :
Kontinuierliche Bestimmung des Werkzeugverschleisses und der Verschleissgeschwindigkeit während des Schnittes und Nutzung dieser steigen Angaben zur Bearbeitungsoptimierung
H. Weber   / R. Winkler
STC C,  23/1/1974,  P.31
Keywords:
Abstract :
Performance of AC-systems in relation to measurable parameters
A. Novak, B. Colind  
STC C,  23/1/1974,  P.33
Keywords:
Abstract :
Application of novel technological principles for increasing the production rate of machining processes
J. Buda, M. Kovac  
STC C,  23/1/1974,  P.35
Keywords:
Abstract :
Tracking tool deterioration by computer during actual machining
L.V. Colwell  
STC C,  23/1/1974,  P.29
Keywords:
Abstract :

 STC E 
Thyristorized EDM generator
M. Motoki, S. Yorigami   / K. Okushima
STC E,  23/1/1974,  P.37
Keywords:
Abstract :
The perspective of EDM machining under a pressurized dielectric, for research and industry
I. Isarie   / R. Snoeys
STC E,  23/1/1974,  P.39
Keywords:
Abstract :
Performance tests of a pulse controlled EDM machine
P.K. Mishra, I. Ham, A. Bhattacharyya  
STC E,  23/1/1974,  P.41
Keywords:
Abstract :
Electrocontact discharge machining, prospects and limitations
F.O. Rasch, p. Mahle  
STC E,  23/1/1974,  P.43
Keywords:
Abstract :
Electrochemical machining calculation of side gap with respect on hydrogen evolution
H. Dietz, K.G. Günther, K. Otto  
STC E,  23/1/1974,  P.45
Keywords:
Abstract :
Ion beam sputter-machining of glass aspheric lens making
N. Taniguchi, N. Kanekama, T. Miyazaki  
STC E,  23/1/1974,  P.47
Keywords:
Abstract :

 STC F 
Graphical analysis of plastic plane stress fields
A. Romiti   / G.F. Micheletti
STC F,  23/1/1974,  P.49
Keywords:
Abstract :
Theory of cold forming tap
B.F. Von Turkovich, W. Henderer  
STC F,  23/1/1974,  P.51
Keywords:
Abstract :
Stress analysis in some cold forging tool components and their design guides
S. Matsubara, H. Kudo  
STC F,  23/1/1974,  P.53
Keywords:
Abstract :
On the critical radius in sheet bending
J.A.G. Kals, P.C. Veenstra  
STC F,  23/1/1974,  P.55
Keywords:
Abstract :
Relations between the surface flaws and shapes of pass on bar and rod rolling
M. Asakawa, I. Matsui, T. Ogata, M. Fujita   / H. Hasunuma
STC F,  23/1/1974,  P.57
Keywords:
Abstract :
Einfluss der Werkzeuggeometrie auf Verlauf und Grösswert der Stempelkraft beim Biegen im V-Gesenk
E. Dannenmann   / K. Lange
STC F,  23/1/1974,  P.59
Keywords:
Abstract :
Der Einfluss der hohen Geschwindigkeit auf das Schneiden von Metallen
P. Huml   / P.O. Strandell
STC F,  23/1/1974,  P.61
Keywords:
Abstract :
Upset tests on steels for cold forging
F.W. Boulger, H.J. Henning, J.R. Becker  
STC F,  23/1/1974,  P.63
Keywords:
Abstract :
Berechnung der Einschnürung rohrförmiger Werkstücke durch elektromagnetisches Umformen
J. Jablonski, R. Winkler  
STC F,  23/1/1974,  P.65
Keywords:
Abstract :
On resistance to deformation of aluminium alloys
Y. Matsuura, M. Motomura, M. Arit, T. Mori, N. Okabe, J. Masuda   / A. Kobayashi
STC F,  23/1/1974,  P.67
Keywords:
Abstract :
An experimental investigation of central burst formation during hydrostatic extrusion using wax to simulate metal
W.B. Rice, J.N. Garner  
STC F,  23/1/1974,  P.69
Keywords:
Abstract :
On the properties of hydrostatically extruded copper
R.N. Aggrawal, B. Lengyel   / J.M. Alexander
STC F,  23/1/1974,  P.71
Keywords:
Abstract :
Forming behaviour of metals under hydrostatic pressure
M. Miyagawa, M. Shinohara   / N. Taniguchi
STC F,  23/1/1974,  P.73
Keywords:
Abstract :
Hydrostatic extrusion of tubes
T. Matsushita, Y. Yamaguchi, M. Noguchi, M. Nishihara   / H. Takeyama
STC F,  23/1/1974,  P.75
Keywords:
Abstract :
Analysis of combined backward-forward extrusion
B. Avitzur, W.C. Hahn, M. Mori   / S. Kobayashi
STC F,  23/1/1974,  P.77
Keywords:
Abstract :
Instabilités d'écoulement thermo-visco-plastiques
P. Baque, E. Felder   / R. Weill
STC F,  23/1/1974,  P.79
Keywords:
Abstract :

 STC G 
Wheel wear and forces in surface grinding
J. Verkerk   / A.J. Pekelharing
STC G,  23/1/1974,  P.81
Keywords:
Abstract :
Grindability of metals using various abrasive grains
S. Okada, N. Kumagai  
STC G,  23/1/1974,  P.83
Keywords:
Abstract :
Relationship between single abrasive grain wear and actual wheel grinding test results
T. Matsuo   / N. Taniguchi
STC G,  23/1/1974,  P.85
Keywords:
Abstract :
Factors affecting borazon (CBN) grinding systems
R.P. Lindsay  
STC G,  23/1/1974,  P.87
Keywords:
Abstract :
Peculiarity in the grinding of hardened steel
K. Nakayama, J. Takagi, T. Nakano   / N. Takenaka
STC G,  23/1/1974,  P.89
Keywords:
Abstract :
Out-of-straightness of work considering the effect of thermal work expansion on depth of cut in grinding
M. Masuda, S. Shiozaki   / H. Hasunuma
STC G,  23/1/1974,  P.91
Keywords:
Abstract :
Specific energy in single point grinding
J.N. Brecker, M.C. Shaw  
STC G,  23/1/1974,  P.93
Keywords:
Abstract :
A technique for investigating the surface features of a grinding wheel
R. Komanduri, M.C. Shaw  
STC G,  23/1/1974,  P.95
Keywords:
Abstract :
An economic analysis of vertical spindle abrasive machining
A. De Filippi  
STC G,  23/1/1974,  P.97
Keywords:
Abstract :
Elastic behaviour of contact wheel in belt grinding
Y. Tanaka, K. Kitajima  
STC G,  23/1/1974,  P.99
Keywords:
Abstract :
Adaptive control optimization of high efficiency external grinding - concept technological basics and application
W. König  
STC G,  23/1/1974,  P.101
Keywords:
Abstract :
Polishing of Si single crystals with elastic wheel newly developped
M. Ikeda, A. Yamada, S. Shiratori   / A. Kobayashi
STC G,  23/1/1974,  P.103
Keywords:
Abstract :

 STC M 
Assembly of mechanical elements by pneumatic system with tolerance feel and defect rejection
A. Romiti, G. Belforte   / G.F. Micheletti
STC M,  23/1/1974,  P.105
Keywords:
Abstract :
The variability of the transmission ratio of gears
E. Botez   / S. Enache
STC M,  23/1/1974,  P.107
Keywords:
Abstract :
A graphical solution of a thirdorder hydrocopying system
A.S. Chowdhury, A.K. Paul, A. Bhattacharyya  
STC M,  23/1/1974,  P.109
Keywords:
Abstract :
GAD im Werkzeugmaschinenbau : Beitrag zur Konstruktionsoptimierung von numerisch gesteuerten Mehrspindel-Drehmaschinen
G. Spur, K. Feldmann  
STC M,  23/1/1974,  P.111
Keywords:
Abstract :
The method of parameter optimization of the machine tool main drive
J. Baran, K. Marchelek   / J. Kaczmarek
STC M,  23/1/1974,  P.113
Keywords:
Abstract :
The design and development of a high precision computer controlled Cam grinding machine
P.A. McKeown, J. Dinsdale   / J. Loxham
STC M,  23/1/1974,  P.115
Keywords:
Abstract :
Selbsterregte Schwingungen beim Aussen-Rundeinstechschleifen
I. Inasaki, S. Yonetsu, T. Shimizu   / N. Takenaka
STC M,  23/1/1974,  P.117
Keywords:
Abstract :
Stability analysis of the cutting process at varying spindle rotation
T. Sata, T. Inamura  
STC M,  23/1/1974,  P.119
Keywords:
Abstract :
Active suppression of chatter by programmed variation of spindle speed
T. Takemura, T. Kitamura   / K. Okushima
STC M,  23/1/1974,  P.121
Keywords:
Abstract :
The use of dampers for reducing technological noise in turning
M. Favareto, L. Borsati  
STC M,  23/1/1974,  P.123
Keywords:
Abstract :
Noise reduction in integral HP induction motors
A.T. Pavlovic, J.G. Bollinger  
STC M,  23/1/1974,  P.125
Keywords:
Abstract :
Computer design of circular saws
M.F. De Vries   / J.G. Bollinger
STC M,  23/1/1974,  P.127
Keywords:
Abstract :
Problems and possibilities of five-axes milling
G. Stute, H. Damshom  
STC M,  23/1/1974,  P.129
Keywords:
Abstract :
Entwurf und Implementierung rechnergeführter Fertigungssysteme
H. Opitz  
STC M,  23/1/1974,  P.131
Keywords:
Abstract :
Theoretical and experimental dynamic analysis of hydrostatic pads fed by constant pressure
M. Poli, R. Chiappulini  
STC M,  23/1/1974,  P.133
Keywords:
Abstract :

 STC Me 
Betrachtungen zur Genauigkeit von 3-Koordinaten-Messmaschinen
T. Stöferle, F. Ertl  
STC Me,  23/1/1974,  P.135
Keywords:
Abstract :
Measurement of threedimensional displacement of machine tool structure by means of holography
T. Sata, N. Okubo, Y. Takeuchi, S. Saeki, M. Suzuki  
STC Me,  23/1/1974,  P.137
Keywords:
Abstract :
Magnetic transducers for the measure of forces and torques
C. Fraudin, J. Lombard  
STC Me,  23/1/1974,  P.139
Keywords:
Abstract :
Einfluss von Formfehlern auf Mass- und Lagebestimmung
A. Wirtz  
STC Me,  23/1/1974,  P.141
Keywords:
Abstract :
Fracture energy as quality control tool
J.O. Outwater, B.F. Von Turkovich  
STC Me,  23/1/1974,  P.143
Keywords:
Abstract :
Analyse der Kenngrössen, von welchen der ökonomische Effekt bei der Mechanisierung und Automatisierung des Messprozesses abhängt
L. Nawara  
STC Me,  23/1/1974,  P.145
Keywords:
Abstract :

 STC O 
Adaptive control of machine tools using minicomputer
A. Noh, S. Fujita   / A. Kobayashi
STC O,  23/1/1974,  P.147
Keywords:
Abstract :
Identification strategy and simulation for the adaptive control of machine tools
I.H. Selim, A. Moisan  
STC O,  23/1/1974,  P.149
Keywords:
Abstract :
On line control of the cutting state by the pattern recognition technique
T. Sata, K. Matsushima  
STC O,  23/1/1974,  P.151
Keywords:
Abstract :
A study on adaptive control in an NC milling machine
K. Yamazaki, A. Yamada, N. Sawai   / H. Takeyama
STC O,  23/1/1974,  P.153
Keywords:
Abstract :
Commande directe d'une machine-outil par calculateur industriel. Etude d'un interpolateur multifonctions
J. Richard, M. Véron, S. Lepage   / R. Weill
STC O,  23/1/1974,  P.155
Keywords:
Abstract :
Using a mini computer to up-grade operator control of a complex process
C. De Beer, G. Verkoeijen  
STC O,  23/1/1974,  P.157
Keywords:
Abstract :
Planung ung Organisation rechnergesteuerter Fertigungssysteme
H. Opitz, W. Eversheim  
STC O,  23/1/1974,  P.159
Keywords:
Abstract :
Some examples on real time production control systems
A. Rolstadas   / O. Bjoerke
STC O,  23/1/1974,  P.161
Keywords:
Abstract :
Auslegung von Störpuffern in automatischen Fertigungslinien
H.J. Warnecke, R. Von Stetten  
STC O,  23/1/1974,  P.163
Keywords:
Abstract :
Penalty method determining an NC cutter path automatically
Y. Kakazu, N. Okino, K. Hoshi   / N. Taniguchi
STC O,  23/1/1974,  P.165
Keywords:
Abstract :
MAD : Machining oriented automatic decision system of tooling for machining center
H. Takeyama, K. Inoue, T. Honda, H. Suzuki, M. Sato, K. Muto  
STC O,  23/1/1974,  P.167
Keywords:
Abstract :
New machining data handbook concepts for starting recommendations
J.F. Kahles, M.Y. Friedman, N. Zlatin  
STC O,  23/1/1974,  P.169
Keywords:
Abstract :
Machinability data bank design
M.Y. Friedman, M. Field, J.F. Kahles  
STC O,  23/1/1974,  P.171
Keywords:
Abstract :
Optimum tool replacement interval in turning
R.K. Khandelwal, P.C. Pandey   / A. Bhattacharyya
STC O,  23/1/1974,  P.173
Keywords:
Abstract :
Optimum machining conditions for flow-type multistage machining systems
K. Iwata, Y. Murotsu, F. Oba  
STC O,  23/1/1974,  P.175
Keywords:
Abstract :
Economic considerations of industrial automation
W.B. Heginbotham  
STC O,  23/1/1974,  P.177
Keywords:
Abstract :

 STC S 
Foundamental problems in surface profile analysis
A. Leroy  
STC S,  23/1/1974,  P.179
Keywords:
Abstract :
Theoretical analysis of stylus integration
D.J. Whitehouse  
STC S,  23/1/1974,  P.181
Keywords:
Abstract :
The role of NBS in the U.S. national measurement system for surface finish
R.D. Young   / J.B. Bryan
STC S,  23/1/1974,  P.183
Keywords:
Abstract :
Survey on surface roughness and surface integrity requirements for machined components
J.F. Kahles, M. Field, R.D. Young, D.J. Whitehouse  
STC S,  23/1/1974,  P.185
Keywords:
Abstract :
Randzonenbeeinflussung durch Spanen und Abtragen - ein Beitrag zur Anpassung der Analysenmethoden
H.K. Tönshoff   / G. Spur
STC S,  23/1/1974,  P.187
Keywords:
Abstract :
Measurement of smooth surface roughness by means of photometric methods
P.M. Lonardo   / G.F. Micheletti
STC S,  23/1/1974,  P.189
Keywords:
Abstract :
Plastically deformed debris and built-up edge produced on surfaces by chip removal and abrasive machining processes
M. Field  
STC S,  23/1/1974,  P.191
Keywords:
Abstract :
On surface integrity of pitted machine tool gear flanks
V.C. Venkatesh, R. Krishnamurthi  
STC S,  23/1/1974,  P.193
Keywords:
Abstract :
The state of surface layer of constructional steels after the rolling-burnishing with multi-roll-head
J. Kaczmarek, W. Polowski  
STC S,  23/1/1974,  P.195
Keywords:
Abstract :