THE INTERNATIONAL ACADEMY FOR PRODUCTION ENGINEERING
LOG IN FOR MEMBERS
CIRP ANNALS 1976 |
GO TO STC: A C Dn E F G M O P S Cross-STC |
STC C |
| Verbesserung der Bohrungsform beim Reiben |
| K. Tuffentsammer (1), G. Buck |
| STC C, 25/1/1976, P.1 |
| Keywords: |
|
Abstract : |
| Schnittkraftberechnungen für das Räumen |
| H.R. Victor (1) |
| STC C, 25/1/1976, P.7 |
| Keywords: |
|
Abstract : |
| On the storage of data on metal cutting forces |
| K. Nakayama, M. Arai / N. Takenaka |
| STC C, 25/1/1976, P.13 |
| Keywords: |
|
Abstract : |
| A mathematical model of the radial and axial throw of square indexable inserts in a face milling cutter |
| A. Ber (1), D. Feldmann |
| STC C, 25/1/1976, P.19 |
| Keywords: |
|
Abstract : |
| Bearbeitung von Innengewinden in Maschinengehäuseteilen |
| N.N. Zorev (1), A.P. Tschornyj |
| STC C, 25/1/1976, P.25 |
| Keywords: |
|
Abstract : |
| The use of statistical transformations in assessing life of cutting tools |
| J.G. Wager / G. Lorenz |
| STC C, 25/1/1976, P.29 |
| Keywords: |
|
Abstract : |
| Predicting tool life from fundamental work material properties and cutting conditions |
| W.F. Hastings, P.L.B. Oxley (1) |
| STC C, 25/1/1976, P.33 |
| Keywords: |
|
Abstract : |
| The influence of tool/chip contact length on cutting behaviour and its use in tool selection |
| Z. Katz, C. Rubenstein / E. Lenz |
| STC C, 25/1/1976, P.39 |
| Keywords: |
|
Abstract : |
| Contribution concernant l'établissement des conditions de coupe |
| S. Enache (1), A. Dorin, E. Strajescu |
| STC C, 25/1/1976, P.45 |
| Keywords: |
|
Abstract : |
| The influence of microstructure discontinuities on chip formation |
| R.H. Brown (1), H.S. Luong |
| STC C, 25/1/1976, P.49 |
| Keywords: |
|
Abstract : |
| A basic mechanism for built-up edge formation in machining |
| H. Bao, M.G. Stevenson / P.L.B. Oxley |
| STC C, 25/1/1976, P.53 |
| Keywords: |
|
Abstract : |
| Toughness testing of carbides : some interesting results obtained when facing pins mounted on a lathe face plate |
| J. Girard, R. Geslot (2) / T. Vinh |
| STC C, 25/1/1976, P.59 |
| Keywords: |
|
Abstract : |
| The significance of dynamic crack behaviour in chip formation |
| K. Iwata (2), K. Ueda |
| STC C, 25/1/1976, P.65 |
| Keywords: |
|
Abstract : |
| Chip formation in machining operations at small diameter |
| C.A. Van Luttervelt / A.J. Pekelharing |
| STC C, 25/1/1976, P.71 |
| Keywords: |
|
Abstract : |
| Measurements of crater wear using replica molds |
| J. Samuels, M. Tani, C. Beiswenger, I. Ham (1) |
| STC C, 25/1/1976, P.77 |
| Keywords: |
|
Abstract : |
| Tribology of metal cutting and creation of new tool materials |
| T.N. Loladze (1) |
| STC C, 25/1/1976, P.83 |
| Keywords: |
|
Abstract : |
| Temperature-tool life relationships for resulphurised low carbon free machining steels |
| A.H. Redford, B. Mills, S. Akhtar / A.W.J. Chisholm |
| STC C, 25/1/1976, P.89 |
| Keywords: |
|
Abstract : |
| Cutting performance of carbide tools coated or sintered with complex oxides |
| N. Narutaki / K. Okushima |
| STC C, 25/1/1976, P.93 |
| Keywords: |
|
Abstract : |
| Cutting edge wear in microscale physical conditions-wear processes |
| U. Höglund / O. Svahn |
| STC C, 25/1/1976, P.99 |
| Keywords: |
|
Abstract : |
| Effect of tool life data analysis on tool life equation |
| E. Kuljanic (2) / V. Solaja |
| STC C, 25/1/1976, P.105 |
| Keywords: |
|
Abstract : |
| Investigations of the cutting edge in cemented carbide tools |
| P. Leskovar (2) / J. Peklenik |
| STC C, 25/1/1976, P.111 |
| Keywords: |
|
Abstract : |
STC E |
| Study on ultrasonic laser machining |
| M. Mori, H. Kumehara / A. Kobayashi |
| STC E, 25/1/1976, P.115 |
| Keywords: |
|
Abstract : |
| L.B.M. and E.D.M. - a comparison on the cracks' behaviour |
| A. Schachrai, E. Lenz (1) |
| STC E, 25/1/1976, P.121 |
| Keywords: |
|
Abstract : |
| Effect of pattern of grain boundary network on metal removal rate in electrochemical machining |
| L. Kops, V.B. Quach / W.B. Rice |
| STC E, 25/1/1976, P.125 |
| Keywords: |
|
Abstract : |
| Etude analytique de l'usure en électro-érosion |
| C. Marty / R. Weill |
| STC E, 25/1/1976, P.131 |
| Keywords: |
|
Abstract : |
| Contribution to the micro analysis of the spark eroded surfaces |
| F. Roethel (2), L. Kosec, V. Garbajs / J. Peklenik |
| STC E, 25/1/1976, P.135 |
| Keywords: |
|
Abstract : |
| Study on EDM with wire electrode; Gap phenomena |
| N. Kinoshita (2), M. Fukui, H. Shichida, G. Gamo / T. Sata |
| STC E, 25/1/1976, P.141 |
| Keywords: |
|
Abstract : |
STC F |
| Evaluation of the influence of redundant work and friction in wire drawing |
| E. Felder / M. Lagasse |
| STC F, 25/1/1976, P.147 |
| Keywords: |
|
Abstract : |
| Method of calculation of non-stationary deformation processes |
| L. Cser / L.F. Gillemot |
| STC F, 25/1/1976, P.153 |
| Keywords: |
|
Abstract : |
| New method for cutting of hardened carbon steels |
| B. Örtenblad, B. Appell / P.O. Strandell |
| STC F, 25/1/1976, P.159 |
| Keywords: |
|
Abstract : |
| Prediction of conditions of central bursting in hydrostatic extrusion |
| J.N. Garner, W.B. Rice (1) |
| STC F, 25/1/1976, P.165 |
| Keywords: |
|
Abstract : |
| Ductile fracture in wire drawing process |
| M. Mohamdein, T. Vinh (1) |
| STC F, 25/1/1976, P.169 |
| Keywords: |
|
Abstract : |
| Measurement of thermomechanical conditions in wire drawing dies |
| E. Felder, A. Le Floc'h / R. Weill |
| STC F, 25/1/1976, P.173 |
| Keywords: |
|
Abstract : |
| Investigations of cold forming friction and lubrication with a sheet drawing test |
| H. Kudo (1), S. Tanaka, K. Imamura, K. Suzuki |
| STC F, 25/1/1976, P.179 |
| Keywords: |
|
Abstract : |
| Influence of the holding time between the deformations on ductility in hot working |
| T. Brolin / P.O. Strandell |
| STC F, 25/1/1976, P.185 |
| Keywords: |
|
Abstract : |
STC G |
| The mechanism of metal build-up on aluminum oxide abrasive |
| R. Komanduri / M.C. Shaw |
| STC G, 25/1/1976, P.191 |
| Keywords: |
|
Abstract : |
| Three dimensional measurement of the grinding wheel surface-evaluation and effect on cutting behaviour |
| W. Koenig (1), W. Lortz |
| STC G, 25/1/1976, P.197 |
| Keywords: |
|
Abstract : |
| On the loss of surface integrity and surface form due to thermoplastic stress in plunge grinding operations |
| R.S. Hahn (1) |
| STC G, 25/1/1976, P.203 |
| Keywords: |
|
Abstract : |
| Kinematical approach to the effect of wheel dressing conditions on the grinding process |
| J. Verkerk / A.J. Pekelharing |
| STC G, 25/1/1976, P.209 |
| Keywords: |
|
Abstract : |
| Research on properties of surface layer after internal superfinish |
| J. Kaczmarek (1), W. Pietrusewicz |
| STC G, 25/1/1976, P.215 |
| Keywords: |
|
Abstract : |
| Rectification par la meule borazon à liant céramique |
| S. Okada / N. Taniguchi |
| STC G, 25/1/1976, P.219 |
| Keywords: |
|
Abstract : |
| Abrasive belt grinding performance |
| T. Hanaoka, K. Sakamiya, A. Kobayashi (1), M. Harada |
| STC G, 25/1/1976, P.225 |
| Keywords: |
|
Abstract : |
| A newly developed in-process sensor for detecting active grain wear in grinding operation |
| T. Suto, H. Inoue, T. Waida, H. Noguchi, K. Tamakohri, T. Sata (1) |
| STC G, 25/1/1976, P.229 |
| Keywords: |
|
Abstract : |
| Thermal deformations and profile errors of workpieces in surface grinding |
| Y. Nakano, H. Uchida, K. Ota / N. Takenaka |
| STC G, 25/1/1976, P.235 |
| Keywords: |
|
Abstract : |
| Monte Carlo simulation of belt grinding process |
| Y. Namba, H. Tsuwa / Y. Tanaka |
| STC G, 25/1/1976, P.241 |
| Keywords: |
|
Abstract : |
| An objective method for evaluating grinding coolants |
| J. Peters (1), R. Aerens |
| STC G, 25/1/1976, P.247 |
| Keywords: |
|
Abstract : |
| A new apparatus for the study of impact accompanied by sliding |
| J. Blouet, J. Seige, R. Gras, R. Courtel / T. Vinh |
| STC G, 25/1/1976, P.251 |
| Keywords: |
|
Abstract : |
STC M |
| Dynamic analysis of machine tools using complex modal method |
| J. Peters (1), M. Mergeay |
| STC M, 25/1/1976, P.257 |
| Keywords: |
|
Abstract : |
| Visual representation of the dynamic behaviour of machine tool structures |
| M. Weck (1), W. Miessen, W. Müller, E.K. Prössler |
| STC M, 25/1/1976, P.263 |
| Keywords: |
|
Abstract : |
| Eliminating noise in shock excitation testing |
| T. Moriwaki, J. Tlusty (1) |
| STC M, 25/1/1976, P.267 |
| Keywords: |
|
Abstract : |
| An analysis of chatter vibration while turning slender workpieces between centres |
| A. Shanker, O.C. Pandey / V.C. Venkatesh |
| STC M, 25/1/1976, P.273 |
| Keywords: |
|
Abstract : |
| On a new comparative index of machine-tool working performance |
| V. Solaja (1), M. Kalajdzic, R. Albijanic |
| STC M, 25/1/1976, P.277 |
| Keywords: |
|
Abstract : |
| Dynamic performance tests for machine tools - some findings from the industrial experiences of CERMO and MTIRA |
| J. Lombard (1), F. Mirski (2), H.D. Beeson, A.E. De Barr |
| STC M, 25/1/1976, P.281 |
| Keywords: |
|
Abstract : |
| Development of machine tool structure analysis program (MASAP) |
| T. Sata (1), T. Yasui, N. Okubo, H. Suzuki, T. Naritomi, T. Yamada |
| STC M, 25/1/1976, P.287 |
| Keywords: |
|
Abstract : |
| Aerostatic bearings with infinite stiffness |
| E. Blondeel, R. Snoeys (1), L. Devrieze |
| STC M, 25/1/1976, P.291 |
| Keywords: |
|
Abstract : |
| Analysis of the thermal behaviour of a machine tool table using the finite element method |
| A. Camera, M. Favareto (2), L. Militano, F. D'Aprile / G.F. Micheletti |
| STC M, 25/1/1976, P.297 |
| Keywords: |
|
Abstract : |
| Geräuschentstehung und Lärmminderung beim Schleifen von Blech |
| H.K. Toenshoff (1), G. Rohr, H.-D. Raschke |
| STC M, 25/1/1976, P.301 |
| Keywords: |
|
Abstract : |
| Einfluss der Befestigung von Maschinengehäusen auf ihre Geräuschabstrahlung |
| K. Tuffentsammer (1), R. Goesele |
| STC M, 25/1/1976, P.307 |
| Keywords: |
|
Abstract : |
| The development of the |
| A. Kanai, N. Suzuki, M. Toriumi, M. Miyashita / A. Kobayashi |
| STC M, 25/1/1976, P.313 |
| Keywords: |
|
Abstract : |
| Tool collision and machine considerations in adaptive control systems |
| J.N. Brecker (2), L.Y. Shum / M.C. Shaw |
| STC M, 25/1/1976, P.319 |
| Keywords: |
|
Abstract : |
| The role of microprocessors in future CNC systems |
| J. Bollinger (1), J. Mills |
| STC M, 25/1/1976, P.323 |
| Keywords: |
|
Abstract : |
| Flexible manufacturing cells in multiple station production - the realisation of a modular flexible manufacturing system for rotational parts |
| G. Spur (1), H.P. Mattle, H. Rittinghausen, K.V. v. Schoening |
| STC M, 25/1/1976, P.329 |
| Keywords: |
|
Abstract : |
| Flexible Fertigungssysteme - Planung und Auslegung des Werkstückflusssystems |
| G. Stute (1), E. Bauer, R. Wilhelm |
| STC M, 25/1/1976, P.335 |
| Keywords: |
|
Abstract : |
STC Me |
| Contribution à la vérification des filetages coniques |
| J. Simonet (2) / E. Bodart |
| STC Me, 25/1/1976, P.341 |
| Keywords: |
|
Abstract : |
| Measurement of dynamic behaviours of mechanical structure by means of double pulsed holography and its application |
| T. Sata (1), T. Yasui, N. Okubo, M. Suzuki, A. Kuroiwa |
| STC Me, 25/1/1976, P.345 |
| Keywords: |
|
Abstract : |
| Vibration analysis by laser beam diffraction |
| A. Ono, T. Komatsu, N. Hoshina (2), A. Kobayashi (1) |
| STC Me, 25/1/1976, P.349 |
| Keywords: |
|
Abstract : |
| Wirtschaftlichkeit von Mehrkoordinatenmessgeräten |
| H.J. Warnecke (1), M. Dietzsch |
| STC Me, 25/1/1976, P.355 |
| Keywords: |
|
Abstract : |
| Controling of complex surface with a 3 axis measuring machine |
| P. Bourdet, A. Clement / R. Weill |
| STC Me, 25/1/1976, P.359 |
| Keywords: |
|
Abstract : |
| The reliability and maintenance of machine tools |
| A.E. De Barr / F. Koenigsberger |
| STC Me, 25/1/1976, P.363 |
| Keywords: |
|
Abstract : |
| Automatische Ueberwachung und Fehlerdiagnose an Werkzeugmaschinen |
| T. Stoeferle (1), H. Hohmann |
| STC Me, 25/1/1976, P.369 |
| Keywords: |
|
Abstract : |
STC O |
| Planning and development of mechanical handling systems |
| W. Eversheim (1), E. Schimke, R.D. Hoeschen |
| STC O, 25/1/1976, P.375 |
| Keywords: |
|
Abstract : |
| Rechnerunterstützte Montageplanerstellung im Dialogverkehr |
| H.J. Warnecke (1), O. Hirschbach |
| STC O, 25/1/1976, P.381 |
| Keywords: |
|
Abstract : |
| Experimental analysis of handling devices and industrial robots |
| M. Weck (1), C. D'Souza, G. Engel, W. Miessen |
| STC O, 25/1/1976, P.385 |
| Keywords: |
|
Abstract : |
| Applications des mesures énergétiques au contrôle automatique des procédés d'usinage |
| D. Bizeul, F. Le Maitre (1) |
| STC O, 25/1/1976, P.391 |
| Keywords: |
|
Abstract : |
| Examples of n order continuity between surface patches |
| M. Véron, G. Ris, J.-P. Musse / P. Bézier |
| STC O, 25/1/1976, P.397 |
| Keywords: |
|
Abstract : |
| Primärdatengewinnung für Fräsoptimierung durch Richtwertmaschine |
| H.-J. Jacobs / R. Winkler |
| STC O, 25/1/1976, P.403 |
| Keywords: |
|
Abstract : |
| On the optimal performance of NC positioning and tool-changing systems |
| J.R. Crookall (2), A.T.M. Jamil / J.M. Alexander |
| STC O, 25/1/1976, P.407 |
| Keywords: |
|
Abstract : |
| Approximate geometrical representation of stepping motor performance curves using least squares methods |
| J.W. Vraets, D. French / G.F. Micheletti |
| STC O, 25/1/1976, P.413 |
| Keywords: |
|
Abstract : |
| Operations scheduling for group technology applications |
| K. Hitomi, I. Ham (1) |
| STC O, 25/1/1976, P.419 |
| Keywords: |
|
Abstract : |
| Data structure in software for lathe operation |
| K. Inoue (2), T. Honda, H. Sekiguchi, K. Takada, H. Takeyama (1) |
| STC O, 25/1/1976, P.423 |
| Keywords: |
|
Abstract : |
| Development of a programming system for NC-machining centers |
| W.J. Oudolf / R. Van Hasselt |
| STC O, 25/1/1976, P.429 |
| Keywords: |
|
Abstract : |
| Processing of geometry in a technologically oriented programming system |
| J. Koloc (1), L. Bouwer |
| STC O, 25/1/1976, P.435 |
| Keywords: |
|
Abstract : |
| Analysis of Engineering Production systems as a base for product-oriented reconstruction |
| C. De Beer (1), R. Van Gerwen, J. De Witte |
| STC O, 25/1/1976, P.439 |
| Keywords: |
|
Abstract : |
STC S |
| Messung räumlicher Glättungstiefen Rpr mit Hilfe des Archimedischen Prinzips |
| K. Horn / H. Von Weingraber |
| STC S, 25/1/1976, P.443 |
| Keywords: |
|
Abstract : |
| The surface damaged layer study of Mn-Zn single crystal ferrites using magnetic domain observation technique |
| M. Kinoshita, T. Murayama, N. Hoshina (2), A. Kobayashi (1), R. Shimizu, T. Ikuta |
| STC S, 25/1/1976, P.449 |
| Keywords: |
|
Abstract : |
| Relationships between the process roughness and the kinematic roughness in turned surfaces |
| P.M. Lonardo (2) / G.F. Micheletti |
| STC S, 25/1/1976, P.455 |
| Keywords: |
|
Abstract : |
| Approximate methods of assessment of surface topography parameters |
| D.J. Whitehouse (1) |
| STC S, 25/1/1976, P.461 |
| Keywords: |
|
Abstract : |
| In-process detection of surface roughness in machining |
| H. Takeyama (1), H. Sekiguchi, R. Murata, H. Matsuzaki |
| STC S, 25/1/1976, P.467 |
| Keywords: |
|
Abstract : |