CIRP ANNALS 1969
|
|
|
STC none |
The web thickness of twist drills
|
C. De Beer
|
STC none, 18/1/1969, P.81
|
Keywords: |
Abstract :
|
Break mechanisms in cutting with a chipbreaker
|
C. Spaans, P.F.H.J. Van Geel
|
STC none, 18/1/1969, P.87
|
Keywords: |
Abstract :
|
Some remarks on electro-chemical turning
|
A. Hofstede, J.W.M. Van den Brekel
|
STC none, 18/1/1969, P.93
|
Keywords: |
Abstract :
|
The specific wear rate in cutting tools and its application to the assessment of machinability
|
R.A. Etheridge, T.D. Hsü
|
STC none, 18/1/1969, P.107
|
Keywords: |
Abstract :
|
Eine Klassifizierung der Ebenheits-Messmethoden
|
J. Kilpi
|
STC none, 18/1/1969, P.119
|
Keywords: |
Abstract :
|
Eine Ausgleichungsmethode für Ebenheitsmessungen
|
J. Kilpi
|
STC none, 18/1/1969, P.127
|
Keywords: |
Abstract :
|
The role of plastic anisotropy in sheet metal forming
|
P.B. Mellor
|
STC none, 18/1/1969, P.133
|
Keywords: |
Abstract :
|
Optimum machining conditions on an automatic lathe
|
B. Bartalucci, R. Bedini, G.G. Lisini
|
STC none, 18/1/1969, P.139
|
Keywords: |
Abstract :
|
Some aspects of the influence of gap flushing on the accuracy in finishing by spark erosion
|
H.E. De Bruyn
|
STC none, 18/1/1969, P.147
|
Keywords: |
Abstract :
|
Fundamental considerations in mechanical chip formation
|
G.W. Form, H. Beglinger
|
STC none, 18/1/1969, P.153
|
Keywords: |
Abstract :
|
Oriented micro-scratch tests on worked GaAs surfaces
|
I. Ida
|
STC none, 18/1/1969, P.169
|
Keywords: |
Abstract :
|
An experimental investigation of fluid-film lubrication in hydrostatic extrusion using wax to simulate metals
|
W.B. Rice, H.S.R. Iyengar
|
STC none, 18/2/1969, P.193
|
Keywords: |
Abstract :
|
Some factors influencing the reliability of tool life tests
|
G. Barrow, R.M. Spencer
|
STC none, 18/2/1969, P.199
|
Keywords: |
Abstract :
|
An electro-hydraulic exciter for machine tool testing
|
R. Bell, M. Dolbey
|
STC none, 18/2/1969, P.207
|
Keywords: |
Abstract :
|
Active dampers for machine tools
|
A. Cowley, A. Boyle
|
STC none, 18/2/1969, P.213
|
Keywords: |
Abstract :
|
Accuracy and optimal working-conditions in electro-chemical machining
|
W. Koenig, D. Pahl
|
STC none, 18/2/1969, P.223
|
Keywords: |
Abstract :
|
Rigidité des vis à billes
|
F. Acorte, G. Balbo
|
STC none, 18/2/1969, P.231
|
Keywords: |
Abstract :
|
Temperature distribution on disc clutches in machine tools
|
H. Levy, K. Loewy, E. Lenz
|
STC none, 18/2/1969, P.239
|
Keywords: |
Abstract :
|
A note on the effect of heat treatment on the machinability of A1-Cu-type free-cutting alloy
|
G. Lorenz
|
STC none, 18/2/1969, P.251
|
Keywords: |
Abstract :
|
Influence of initial contact on tool life when face milling high strength materials
|
H. Opitz, H. Beckhaus
|
STC none, 18/2/1969, P.257
|
Keywords: |
Abstract :
|
Geometrical adaptive control of manufacturing systems
|
J. Peklenik
|
STC none, 18/2/1969, P.265
|
Keywords: |
Abstract :
|
Characteristics of tool wear in cryogenic machining
|
K. Uehara, S. Kumagai
|
STC none, 18/2/1969, P.273
|
Keywords: |
Abstract :
|
Messverfahren zur Beurteilung des Streubildes von Schleifbändern zum Schleifen von Holz und Holzwerkstoffen
|
H.-R. Meyer
|
STC none, 18/2/1969, P.279
|
Keywords: |
Abstract :
|
Correlation between idling vibration of machine tool and machine chatter
|
T. Hoshi
|
STC none, 18/2/1969, P.289
|
Keywords: |
Abstract :
|
Bandschleifen von Holz and Holzwerkstoffen mit luftgestützten Schleifbändern
|
G. Pahlitzsch, H.-R. Meyer
|
STC none, 18/2/1969, P.297
|
Keywords: |
Abstract :
|
The effect of the working parameters on the working gap during electrochemical machining
|
K. Kawafune, T. Mikoshiba, K. Noto
|
STC none, 18/2/1969, P.305
|
Keywords: |
Abstract :
|
Hydrostatic bearings as applied to the saddle and cross slide of large heavy duty lathes
|
R. Graziosi
|
STC none, 18/2/1969, P.319
|
Keywords: |
Abstract :
|
Extrusion of hollow component with additional tension
|
H. Kudo, K. Shinozaki
|
STC none, 18/2/1969, P.327
|
Keywords: |
Abstract :
|
Investigation and calculation of the chatter behaviour of lathes and milling machines
|
H. Opitz, F. Bernardi
|
STC none, 18/2/1969, P.335
|
Keywords: |
Abstract :
|
One approach for optimizing control in metal cutting
|
H. Takeyama, H. Sekiguchi, T. Takada
|
STC none, 18/2/1969, P.345
|
Keywords: |
Abstract :
|
Accelerometer applications to tool dynamometers with improved dynamic response
|
Y. Tanaka, N. Ikawa
|
STC none, 18/2/1969, P.353
|
Keywords: |
Abstract :
|
Three dimensional simulation techniques of the grinding process - II. Effect of grinding conditions and wear on the statistical distribution of geometrical chip parameters
|
H. Yoshikawa, J. Peklenik
|
STC none, 18/3/1969, P.361
|
Keywords: |
Abstract :
|
Surface and sub-surface work-hardening produced by the planing operation
|
D. Haslam, C. Rubenstein
|
STC none, 18/3/1969, P.369
|
Keywords: |
Abstract :
|
Le contrôle dimensionnel statistique d'un tour
|
J. Plas
|
STC none, 18/3/1969, P.383
|
Keywords: |
Abstract :
|
Shearing of thermoplastic polymer sheets
|
H. Hojo, H. Masumori, Y. Kageyama
|
STC none, 18/3/1969, P.391
|
Keywords: |
Abstract :
|
Beitrag zur Untersuchung des Zerspanverhaltens von Polyamid 6 beim Drehen
|
G. Spur, G. Zug
|
STC none, 18/3/1969, P.397
|
Keywords: |
Abstract :
|
The influence of stability on cutting data in turning
|
B. Lindstroem
|
STC none, 18/3/1969, P.407
|
Keywords: |
Abstract :
|
Contribution à l'étude de l'usinage du titane et de ses alliages
|
F. Le Maitre
|
STC none, 18/3/1969, P.413
|
Keywords: |
Abstract :
|
Two cases of forced vibrations in grinding machines
|
A.A. Arantes, P.M.R. Da Cunha
|
STC none, 18/3/1969, P.425
|
Keywords: |
Abstract :
|
Systematische Benennung von Verfahren in der Mechanischen Umformtechnik
|
K. Lange
|
STC none, 18/3/1969, P.435
|
Keywords: |
Abstract :
|
Study on high-speed gas bearings for helium expansion turbine - I. Dynamic performance of externally pressurized nitrogen gas bearings
|
S. Togo, Y. Akiyama, N. Takenaka
|
STC none, 18/3/1969, P.445
|
Keywords: |
Abstract :
|
Considérations sur les essais de coupe brusquement interrompue
|
F. Giusti
|
STC none, 18/3/1969, P.453
|
Keywords: |
Abstract :
|
Fabrication of very high frequency coils by grinding, evaporation and electroplating
|
Y. Ueno, I. Ida
|
STC none, 18/3/1969, P.463
|
Keywords: |
Abstract :
|
Beitrag zur Konstruktionsoptimierung
|
G. Spur, J. Herrmann
|
STC none, 18/3/1969, P.483
|
Keywords: |
Abstract :
|
Electro-physical processes in electric pulse metal cutting from the point of view of efficiency and polarity of electrode wear
|
G.N. Meshcheriakov
|
STC none, 18/3/1969, P.491
|
Keywords: |
Abstract :
|
The secondary share zone and the negative wedge on H.S.S. tools
|
V.C. Venkatesh, R. Ramaswami
|
STC none, 18/3/1969, P.513
|
Keywords: |
Abstract :
|
Caractéristiques statiques et dynamiques d'un système vis-écrou hydrostatique
|
J. Lombard, A. Moisan
|
STC none, 18/3/1969, P.521
|
Keywords: |
Abstract :
|
Background and motive for workshop technology in APT
|
G. Sohlenius
|
STC none, 18/3/1969, P.527
|
Keywords: |
Abstract :
|
Typische Konturfehler bei der Werkstückbearbeitung mit numerischen Bahnsteurungen
|
G. Stute, D. Schmid
|
STC none, 18/3/1969, P.531
|
Keywords: |
Abstract :
|
The relation between effective deformation and micro-hardness in a state of large plastic deformation
|
J.A.H. Ramaekers, P.C. Veenstra
|
STC none, 18/3/1969, P.541
|
Keywords: |
Abstract :
|
Cutting temperature thermo-electric measurements
|
B. Alvelid
|
STC none, 18/4/1969, P.547
|
Keywords: |
Abstract :
|
Standzeit des Hartmetallwerkzeugs beim unterbrochenen Schnitt mit Dauerzyklen
|
N.N. Zorew, H.A. Sawiaskin
|
STC none, 18/3/1969, P.555
|
Keywords: |
Abstract :
|
The effect of gases on finish turning: groove formation influenced by gaseous environment
|
G.A. Gieszen
|
STC none, 18/4/1969, P.563
|
Keywords: |
Abstract :
|
On the method of calculating pass schedules for tandem strip mills
|
H. Suzuki, M. Okado
|
STC none, 18/4/1969, P.569
|
Keywords: |
Abstract :
|
Entwicklung eines neuen Honwerkzeuges für das Langhubhohen
|
H. Victor, T. Toenshoff
|
STC none, 18/4/1969, P.573
|
Keywords: |
Abstract :
|
Automatic adaptive control for electro-chemical grinding
|
L.V. Colwell
|
STC none, 18/4/1969, P.577
|
Keywords: |
Abstract :
|
A "Normal Wear" process examined by measurements of Surface Topography
|
D.J. Grieve, H. Kaliszer, G.W. Rowe
|
STC none, 18/4/1969, P.585
|
Keywords: |
Abstract :
|
Analytical study of wall ironing, considering work hardening
|
S. Fukui, A. Hansson
|
STC none, 18/4/1969, P.593
|
Keywords: |
Abstract :
|
Régulation, "en Process", des paramètres de coupe, en fonction de le température de coupe
|
F. Giusti
|
STC none, 18/4/1969, P.601
|
Keywords: |
Abstract :
|
Education in forming. Learning the art by the compression test
|
P.C. Schot
|
STC none, 18/4/1969, P.609
|
Keywords: |
Abstract :
|
Wandstrahlelemente in einer numerischen Steuerung
|
H. Wiesner
|
STC none, 18/4/1969, P.615
|
Keywords: |
Abstract :
|
The importance of workpiece softening on machinability
|
D. Vilenski, M.C. Shaw
|
STC none, 18/4/1969, P.623
|
Keywords: |
Abstract :
|
Considérations sur le système machine-pièce-outil à l'égard de l'optimalisation des usinages par enlèvement de copeau - I. La surface usinée et le système d'usinage
|
G. Carro Cao
|
STC none, 18/4/1969, P.633
|
Keywords: |
Abstract :
|
Considérations sur le système machine-pièce-outil à l'égard de l'optimalisation des usinages par enlèvement de copeau - II. Les conditions technologiques optimales de la coupe des métaux
|
G. Carro Cao
|
STC none, 18/4/1969, P.639
|
Keywords: |
Abstract :
|
Considérations sur le système machine-pièce-outil à l'égard de l'optimalisation des usinages par enlèvement de copeau - III. Les conditions économiques de la coupe des métaux
|
G. Carro Cao
|
STC none, 18/4/1969, P.647
|
Keywords: |
Abstract :
|
Machinability variations in a standardized carbon steel
|
L.G. Akerberg
|
STC none, 18/4/1969, P.653
|
Keywords: |
Abstract :
|
Dynamics and design of dynamometer
|
S. Shiozaki, M. Miyashita
|
STC none, 18/4/1969, P.663
|
Keywords: |
Abstract :
|